Manage the calibration and bump testing on your portable gas detector in the most cost effective way, sort through the data collected and charge your units. Automated testing and calibrating system, automated management of event logs, calibration logs, etc and automated verification of alarm set points allows you to keep working without missing a notification. Different functions are available based on the portable gas detector used with this unit.
Manage the calibration and bump testing on your portable gas detector in the most cost effective way, sort through the data collected and charge your units. Automated testing and calibrating system, automated management of event logs, calibration logs, etc and automated verification of alarm set points allows you to keep working without missing a notification. Different functions are available based on the portable gas detector used with this unit.
This product is a special order item which can’t be returned or cancelled.
The MicroDock II is an automated docking station for portable single gas and multi gas detectors from BW Technologies. The base station is the master unit responsible for recognizing, calibrating, testing, charging and event recording for each gas detector that is docked into a docking module. Each base station can manage up to 10 different detectors in their own attached docked module, six of which can have charging built in.
Features
Supported Models
Compatibility Functions | ||||||
Function | GasAlertClip | GasAlert Extreme | GasAlertMicroClip XT | GasAlertQuattro | GasAlertMax XT II | GasAlertMicro 5 Series |
Bump Check | • | • | • | • | • | • |
Calibrate | • | • | • | • | • | |
Configure | • | • | • | • | • | |
Download Events | • | • | • | • | • | |
Download Data | • | • | • | • | ||
Charging | • | • | • | • | ||
Non-Charging | • | • | • |
General Specifications | |
Size | 8.3 x 10.4 x 3.2 in. / 21.2 x 26.3 x 8.2 cm (base station plus one docking module |
Power Supply | 6V wall adaptor or four C-cell batteries |
External interface | USB 2.0 interface for PC (USB 2.0 full speed) |
Pump | DC motor, micro-diaphragm; 6V PCB mount Flow rate 300 ml/min. (typically |
Solenoid | Built-in (docking modules) |
Command Keys | Base station Menu navigation Docking module One touch bump-test initiation One touch calibration initiation One touch data transfer (specific products) |
LED indicators | Yellow "TEST", Green "PASS", Red "FAIL" |
Certifications and approvals | Ordinary Location approved IEC 61010 / C22.2 No. 61010 European Conformity |
There are many gas detection products on the market that might appear to be the same, but a closer inspection of specification, functionality and features reveals major differences in what products can do and the potential value they can offer. Similarly, individual applications are also unique in their respective designs, needs and processes undertaken.
Before beginning to consider gas detection equipment, a risk assessment needs to be conducted. Any company employing staff has the obligation to conduct risk assessments to identify potential hazards and these can include potential gas, vapor or Oxygen deficiency risks. If gas hazards are identified, gas detection is applicable as a risk reduction method.
Depending on the processes being undertaken and the gases being detected, remote or off-site alarm notification plus event data logging/reporting may also be required for Health and Safety management records. Another factor impacting on the need for enhanced reporting functions might be regulatory compliance or a condition of insurance.
Having identified the primary objective, the suitable equipment is selected by asking a number of key questions. These fall into three broad categories:
The gases to be detected should be identified by the risk assessment, however experienced gas detection equipment manufacturers and their approved distributors are often able to help in this process, based on their experience of similar applications. However, it is important to remember that it is the end-user’s responsibility to identify all potential hazards. It is also essential to identify the potential source of a gas release as this helps determine the number and location of detectors required for a fixed gas detection system.
The performance, accuracy and reliability of any gas detection equipment will be affected by the environmental conditions it is subjected to. Temperature, humidity and pressure levels at the location all have a direct bearing on the type of equipment that should be selected. Additional factors such as potential variations resulting from a production process itself, diurnal/nocturnal fluctuations and seasonal changes may also affect the type of device which is suitable.
The next area of consideration relates to additional product functionality. Aspects like wiring configuration are important, especially when retro-fitting into an existing application. If the apparatus is being integrated into a separate safety system, certain communication protocols may also be required such as HART®, Lonworks or Modbus®. Consideration will also need to be given regarding the requirement for local displays on transmitter units and local configuration of the unit and gas displays may also be a useful addition.
Routine maintenance is another important consideration. Some gases and vapors can be detected with a number of different sensing technologies, e.g. Hydrocarbon gases with catalytic beads or Non-dispersive Infrared NDIR. Catalytic beads do not provide fail-to-safety operation and therefore can require a high frequency of routine maintenance, however NDIR based solutions tend to have a higher initial purchase price, but may require less routine maintenance. In-house resource to undertake such routine maintenance needs to be identified and in the absence of such a resource, budgeting for third party maintenance is an important factor in selecting the right equipment.
If you have questions about any of our gas detection products or services, please don’t hesitate to contact us. Whether you need a hand finding a new product or need help with your current system, just ask our team of Factory Trained Experts.
General Specifications | |
Size | 8.3 x 10.4 x 3.2 in. / 21.2 x 26.3 x 8.2 cm (base station plus one docking module |
Power Supply | 6V wall adaptor or four C-cell batteries |
External interface | USB 2.0 interface for PC (USB 2.0 full speed) |
Pump | DC motor, micro-diaphragm; 6V PCB mount Flow rate 300 ml/min. (typically |
Solenoid | Built-in (docking modules) |
Command Keys | Base station Menu navigation Docking module One touch bump-test initiation One touch calibration initiation One touch data transfer (specific products) |
LED indicators | Yellow "TEST", Green "PASS", Red "FAIL" |
Certifications and approvals | Ordinary Location approved IEC 61010 / C22.2 No. 61010 European Conformity |
There are many gas detection products on the market that might appear to be the same, but a closer inspection of specification, functionality and features reveals major differences in what products can do and the potential value they can offer. Similarly, individual applications are also unique in their respective designs, needs and processes undertaken.
Before beginning to consider gas detection equipment, a risk assessment needs to be conducted. Any company employing staff has the obligation to conduct risk assessments to identify potential hazards and these can include potential gas, vapor or Oxygen deficiency risks. If gas hazards are identified, gas detection is applicable as a risk reduction method.
Depending on the processes being undertaken and the gases being detected, remote or off-site alarm notification plus event data logging/reporting may also be required for Health and Safety management records. Another factor impacting on the need for enhanced reporting functions might be regulatory compliance or a condition of insurance.
Having identified the primary objective, the suitable equipment is selected by asking a number of key questions. These fall into three broad categories:
The gases to be detected should be identified by the risk assessment, however experienced gas detection equipment manufacturers and their approved distributors are often able to help in this process, based on their experience of similar applications. However, it is important to remember that it is the end-user’s responsibility to identify all potential hazards. It is also essential to identify the potential source of a gas release as this helps determine the number and location of detectors required for a fixed gas detection system.
The performance, accuracy and reliability of any gas detection equipment will be affected by the environmental conditions it is subjected to. Temperature, humidity and pressure levels at the location all have a direct bearing on the type of equipment that should be selected. Additional factors such as potential variations resulting from a production process itself, diurnal/nocturnal fluctuations and seasonal changes may also affect the type of device which is suitable.
The next area of consideration relates to additional product functionality. Aspects like wiring configuration are important, especially when retro-fitting into an existing application. If the apparatus is being integrated into a separate safety system, certain communication protocols may also be required such as HART®, Lonworks or Modbus®. Consideration will also need to be given regarding the requirement for local displays on transmitter units and local configuration of the unit and gas displays may also be a useful addition.
Routine maintenance is another important consideration. Some gases and vapors can be detected with a number of different sensing technologies, e.g. Hydrocarbon gases with catalytic beads or Non-dispersive Infrared NDIR. Catalytic beads do not provide fail-to-safety operation and therefore can require a high frequency of routine maintenance, however NDIR based solutions tend to have a higher initial purchase price, but may require less routine maintenance. In-house resource to undertake such routine maintenance needs to be identified and in the absence of such a resource, budgeting for third party maintenance is an important factor in selecting the right equipment.
If you have questions about any of our gas detection products or services, please don’t hesitate to contact us. Whether you need a hand finding a new product or need help with your current system, just ask our team of Factory Trained Experts.