Customer Rating

4.7/5 Stars

19774 REVIEWS
ITM.com

Customer Rating

4.7/5 Stars

19774 REVIEWS

Wear Yellow. Work Safe.

FREE SHIPPING ON ONLINE ORDERS OVER $99*

Wear Yellow. Work Safe.

Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series

Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series-

Downloads: datasheet manual

More BW Products

Ask an Expert

Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series

Model Selection

Honeywell BW MicroClip X3 Series Single-Gas Detector, CO, black
MCX3-000M-B-NA $571.29 CAD
Was: $715.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Single-Gas Detector, CO, yellow
MCX3-000M-Y-NA $571.29 CAD
Was: $715.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Single-Gas Detector, H2S, black
MCX3-00H0-B-NA $584.07 CAD
Was: $731.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Single-Gas Detector, H2S, yellow
MCX3-00H0-Y-NA $584.07 CAD
Was: $731.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Single-Gas Detector, O2, black
MCX3-X000-B-NA $560.90 CAD
Was: $702.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Single-Gas Detector, O2, yellow
MCX3-X000-Y-NA $560.90 CAD
Was: $702.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2, black
MCX3-XU00-B-NA $713.51 CAD
Was: $893.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2, yellow
MCX3-XU00-Y-NA $713.51 CAD
Was: $893.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2, black
MCX3-XW00-B-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2, yellow
MCX3-XW00-Y-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, H2S/CO, black
MCX3-00HM-B-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, H2S/CO, yellow
MCX3-00HM-Y-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/CO, black
MCX3-X00M-B-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/CO, yellow
MCX3-X00M-Y-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/H2S, black
MCX3-X0H0-B-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/H2S, yellow
MCX3-X0H0-Y-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/CO, black
MCX3-XU0M-B-NA $817.38 CAD
Was: $1,023.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/CO, yellow
MCX3-XU0M-Y-NA $817.38 CAD
Was: $1,023.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/H2S, black
MCX3-XUH0-B-NA $817.38 CAD
Was: $1,023.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/H2S, yellow
MCX3-XUH0-Y-NA $817.38 CAD
Was: $1,023.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2/CO, black
MCX3-XW0M-B-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2/CO, yellow
MCX3-XW0M-Y-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2/H2S, black
MCX3-XWH0-B-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2/H2S, yellow
MCX3-XWH0-Y-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/H2S/CO, black
MCX3-X0HM-B-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/H2S/CO, yellow
MCX3-X0HM-Y-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2/H2S/CO, yellow
MCX3-XWHM-Y-NA $836.55 CAD
Was: $1,047.00
 Availability:
11 in Stock
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/H2S/CO, black
MCX3-XUHM-B-NA $946.82 CAD
Was: $1,185.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/H2S/CO, yellow
MCX3-XUHM-Y-NA $946.82 CAD
Was: $1,185.00
 Availability:
2 to 3 Weeks
Show More Models...

Model Selection

Reliable and easy to use, these single and multi-gas detectors can simultaneously monitor for up to four gases (model dependent), including O2, H2S, CO, and combustibles. In addition, these detectors feature an IP68 rating for unmatched water protection, giving workers the confidence that they will stand up to challenging conditions.

Reliable and easy to use, these single and multi-gas detectors can simultaneously monitor for up to four gases (model dependent), including O2, H2S, CO, and combustibles. In addition, these detectors feature an IP68 rating for unmatched water protection, giving workers the confidence that they will stand up to challenging conditions.

Honeywell BW MicroClip X3 Series Single-Gas Detector, CO, black
MCX3-000M-B-NA $571.29 CAD
Was: $715.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Single-Gas Detector, CO, yellow
MCX3-000M-Y-NA $571.29 CAD
Was: $715.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Single-Gas Detector, H2S, black
MCX3-00H0-B-NA $584.07 CAD
Was: $731.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Single-Gas Detector, H2S, yellow
MCX3-00H0-Y-NA $584.07 CAD
Was: $731.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Single-Gas Detector, O2, black
MCX3-X000-B-NA $560.90 CAD
Was: $702.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Single-Gas Detector, O2, yellow
MCX3-X000-Y-NA $560.90 CAD
Was: $702.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2, black
MCX3-XU00-B-NA $713.51 CAD
Was: $893.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2, yellow
MCX3-XU00-Y-NA $713.51 CAD
Was: $893.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2, black
MCX3-XW00-B-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2, yellow
MCX3-XW00-Y-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, H2S/CO, black
MCX3-00HM-B-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, H2S/CO, yellow
MCX3-00HM-Y-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/CO, black
MCX3-X00M-B-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/CO, yellow
MCX3-X00M-Y-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/H2S, black
MCX3-X0H0-B-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/H2S, yellow
MCX3-X0H0-Y-NA $641.60 CAD
Was: $803.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/CO, black
MCX3-XU0M-B-NA $817.38 CAD
Was: $1,023.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/CO, yellow
MCX3-XU0M-Y-NA $817.38 CAD
Was: $1,023.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/H2S, black
MCX3-XUH0-B-NA $817.38 CAD
Was: $1,023.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/H2S, yellow
MCX3-XUH0-Y-NA $817.38 CAD
Was: $1,023.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2/CO, black
MCX3-XW0M-B-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2/CO, yellow
MCX3-XW0M-Y-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2/H2S, black
MCX3-XWH0-B-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2/H2S, yellow
MCX3-XWH0-Y-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/H2S/CO, black
MCX3-X0HM-B-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, O2/H2S/CO, yellow
MCX3-X0HM-Y-NA $735.08 CAD
Was: $920.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL/O2/H2S/CO, yellow
MCX3-XWHM-Y-NA $836.55 CAD
Was: $1,047.00
 Availability:
11 in Stock
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/H2S/CO, black
MCX3-XUHM-B-NA $946.82 CAD
Was: $1,185.00
 Availability:
2 to 3 Weeks
Honeywell BW MicroClip X3 Series Multi-Gas Detector, %LEL (unfiltered)/O2/H2S/CO, yellow
MCX3-XUHM-Y-NA $946.82 CAD
Was: $1,185.00
 Availability:
2 to 3 Weeks

BW MCX3 Offers

Easy to wear, slim, and compact, these gas detectors have visual compliance at a glance with the flashing green IntelliFlash™. Moreover, the easy one-button operation reduces training time and lets workers focus on the job.

Features

  • Unique advanced technology for safety, compliance, and productivity
  • Advanced engineering for reliable battery performance
  • Reflex™ technology to ensure sensor responsiveness
  • Compact, lightweight and easy to use - no expertise required
  • Flashing green IntelliFlash™ light for compliance at a glance
  • Guaranteed runtime for at least a 12-hour shift, down to -20°C, without compromising LEL detection of hydrogen, acetylene, and other combustible gases
  • Durable, rechargeable lithium polymer battery tested to last in extreme environments
  • Ergonomic and wearable - doesn't weigh you down
  • Real-time gas concentrations shown on LCD
  • Bright, wide-angle visual alarm bars
  • IP68 rating ensures maximum protection against dust and water for up to 45 minutes at a depth of 3.9' (1.2 m)
  • User-friendly, tamperproof operation with just one button and intuitive LCD icons
  • IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
  • Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
  • Compatible with IntelliDoX docking station for automated bump tests and calibration (sold separately)
  • Multi-language support in English, French, German, Spanish, and Portuguese
  • Device Management with Honeywell SafetySuite
  • Compatible with Honeywell BW Connect for real-time monitoring (sold separately)
  • Five-year life expectancy
  • An oxygen sensor that operates consistently for five years with no replacement costs for the life of the detector
  • Superior cost of ownership with minimized maintenance and maximized uptime

Applications

  • Underground utility vaults
  • Boiler rooms
  • Post-fire sites
  • Sewers
  • Industrial plants
  • Industrial hygiene
  • First response
  • Remote fleets
  • Manufacturing

BW MCX3 Specifications

Sensor Specifications (model dependent)
H2S Measuring range: 0 to 100 ppm
Resolution: 1 ppm
CO Measuring range: 0 to 500 ppm
Resolution: 1 ppm
O2 Measuring range: 0 to 30%
Resolution: 0.1%
Combustible Gases Measuring range: 0 to 100% LEL, 0 to 5% v/v
Resolution: 1%, 0.1%
General Specifications
Tests Audible/visual alarms on activation; sensors, battery and circuitry (continuous)
Alarms Visual, vibrating, audible (95 dB)
Low, High, TWA, STEL, OL (over limit)
User Options IntelliFlash™ interval
Combustible gas measurement (%LEL or % by volume methane)
User-settable calibration gas level
Force calibration when overdue
Low alarm acknowledge
Language choices
Set custom start-up message
Temperature -4 to 122°F (-20 to 50°C)
Humidity 0 to 95% RH (non-condensing)
Ratings IP68 - up to 45 minutes at 3.9' (1.2 m)
EMI/RFI: Complies with EMC Directive 2004/108/EC
Certifications and Approvals CSA: Class I, Div. 1, Gr. A, B, C, D
ATEX: CEEx, II 1 G. Ex ia IIC T4 Ga
IECEx: Ex ia IIC T4 Ga
CE European Conformity
Expected Service Lifetime Five years including all sensors
Note: Sensors do not contain consumable components and will typically reach the expected lifetime if used according to the instructions in the user manual
Typical Battery Life 18 hours; recharges in less than 6 hours
Note: Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles
Dimensions 4.4 x 2.4 x 1.2" (11.3 x 6 x 3.2 cm)
Weight 6.3 oz (179 g)
Click here for complete specifications on the BW MCX3

What's included with the BW MCX3

  • Gas Detector
  • Calibration Cap and Hose
  • Charging Adapter
  • Manual
  • Three-Year Warranty

Webinar: The Fundamentals of Portable Gas Detection with Honeywell


Flammable and toxic gas detection instruments are generally available in two different formats: portable (spot reading) detectors and fixed (permanently sited) monitors. Selecting which is most appropriate for a particular application depends on several factors. Including how often the area is accessed by personnel, site conditions, whether the hazard is permanent or transitory, how often testing is needed, and last but not least, the availability of finances.

We've teamed up with Honeywell for this short webinar on Portable Gas Detection, where we cover:
• Characteristics and hazards of a confined space
• The 2 main functions of portable gas detectors
• The various applications
• What to do during alarms situations
• Potential contaminants for the sensors
• Calibration versus bump-test... The difference
• Using an IntelliDoX docking station
• Maintenance, cleaning, and service
• Extreme weather conditions... What to do

Meet Shauna Park: Our Gas Detection Expert


Shauna Park is our in-house gas detection expert. Working closely with our entire team of technical experts, Shauna uses her 18+ years of gas detection experience to support customers just like you! Between her and our team of technical experts' knowledge, you can rest assured that all of your inquiries about our products will be answered via chat, email, or phone.

How to: Calibrate a BW Gas Detector


Calibration is pretty important: it re-establishes a base line for your sensors so the electrochemical and the LEL catalytic bead sensor need some kind of base line. That way it knows what a concentration of gas is. You want to make sure that you do your calibration fairly frequently, every 180 days is the manufacturer's default. learn more by watching this informative video.

How to: Bump Test a BW Gas Detector


A bump test is a physical verification that the sensors are responding to a set amount of gas and that your visual and audible alarms are going off as they should. You can hear and see them triggering and verify that everything is basically in operating order. Watch this video to see a live demonstration!

BW GasAlertMicroClip X3 Sensors

Sensor Description Learn More
SR-H-MC BW SR-H-MC Replacement MICROceL Learn More
SR-M-MC BW SR-M-MC Replacement MICROceL Learn More
SR-W-MP75C BW SR-W-MP75C Replacement MICROpeL Learn More
SR-X3P BW SR-X3P Replacement oxygen (O2) sensor Learn More
datasheet for the Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series manual for the Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series quick start guide Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series
Article: How to Select the Right Gas Detection Solution
Brochure: Gas Detection - Gas Book
Brochure: Gas Detection - Gas Book 2
Brochure: Gas Detection - Gas Book 3

Ask a question about Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series

Customer Reviews for the BW MCX3

  • Description ➕➖

    • BW MCX3 Offers

    Easy to wear, slim, and compact, these gas detectors have visual compliance at a glance with the flashing green IntelliFlash™. Moreover, the easy one-button operation reduces training time and lets workers focus on the job.

    Features

    • Unique advanced technology for safety, compliance, and productivity
    • Advanced engineering for reliable battery performance
    • Reflex™ technology to ensure sensor responsiveness
    • Compact, lightweight and easy to use - no expertise required
    • Flashing green IntelliFlash™ light for compliance at a glance
    • Guaranteed runtime for at least a 12-hour shift, down to -20°C, without compromising LEL detection of hydrogen, acetylene, and other combustible gases
    • Durable, rechargeable lithium polymer battery tested to last in extreme environments
    • Ergonomic and wearable - doesn't weigh you down
    • Real-time gas concentrations shown on LCD
    • Bright, wide-angle visual alarm bars
    • IP68 rating ensures maximum protection against dust and water for up to 45 minutes at a depth of 3.9' (1.2 m)
    • User-friendly, tamperproof operation with just one button and intuitive LCD icons
    • IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
    • Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
    • Compatible with IntelliDoX docking station for automated bump tests and calibration (sold separately)
    • Multi-language support in English, French, German, Spanish, and Portuguese
    • Device Management with Honeywell SafetySuite
    • Compatible with Honeywell BW Connect for real-time monitoring (sold separately)
    • Five-year life expectancy
    • An oxygen sensor that operates consistently for five years with no replacement costs for the life of the detector
    • Superior cost of ownership with minimized maintenance and maximized uptime

    Applications

    • Underground utility vaults
    • Boiler rooms
    • Post-fire sites
    • Sewers
    • Industrial plants
    • Industrial hygiene
    • First response
    • Remote fleets
    • Manufacturing
    Show More...
  • Specifications ➕➖

    • BW MCX3 Specifications

    Sensor Specifications (model dependent)
    H2S Measuring range: 0 to 100 ppm
    Resolution: 1 ppm
    CO Measuring range: 0 to 500 ppm
    Resolution: 1 ppm
    O2 Measuring range: 0 to 30%
    Resolution: 0.1%
    Combustible Gases Measuring range: 0 to 100% LEL, 0 to 5% v/v
    Resolution: 1%, 0.1%
    General Specifications
    Tests Audible/visual alarms on activation; sensors, battery and circuitry (continuous)
    Alarms Visual, vibrating, audible (95 dB)
    Low, High, TWA, STEL, OL (over limit)
    User Options IntelliFlash™ interval
    Combustible gas measurement (%LEL or % by volume methane)
    User-settable calibration gas level
    Force calibration when overdue
    Low alarm acknowledge
    Language choices
    Set custom start-up message
    Temperature -4 to 122°F (-20 to 50°C)
    Humidity 0 to 95% RH (non-condensing)
    Ratings IP68 - up to 45 minutes at 3.9' (1.2 m)
    EMI/RFI: Complies with EMC Directive 2004/108/EC
    Certifications and Approvals CSA: Class I, Div. 1, Gr. A, B, C, D
    ATEX: CEEx, II 1 G. Ex ia IIC T4 Ga
    IECEx: Ex ia IIC T4 Ga
    CE European Conformity
    Expected Service Lifetime Five years including all sensors
    Note: Sensors do not contain consumable components and will typically reach the expected lifetime if used according to the instructions in the user manual
    Typical Battery Life 18 hours; recharges in less than 6 hours
    Note: Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles
    Dimensions 4.4 x 2.4 x 1.2" (11.3 x 6 x 3.2 cm)
    Weight 6.3 oz (179 g)
    Click here for complete specifications on the BW MCX3
  • Included ➕➖

    • What's included with the BW MCX3

    • Gas Detector
    • Calibration Cap and Hose
    • Charging Adapter
    • Manual
    • Three-Year Warranty
  • Videos ➕➖

    • Webinar: The Fundamentals of Portable Gas Detection with Honeywell


    Flammable and toxic gas detection instruments are generally available in two different formats: portable (spot reading) detectors and fixed (permanently sited) monitors. Selecting which is most appropriate for a particular application depends on several factors. Including how often the area is accessed by personnel, site conditions, whether the hazard is permanent or transitory, how often testing is needed, and last but not least, the availability of finances.

    We've teamed up with Honeywell for this short webinar on Portable Gas Detection, where we cover:
    • Characteristics and hazards of a confined space
    • The 2 main functions of portable gas detectors
    • The various applications
    • What to do during alarms situations
    • Potential contaminants for the sensors
    • Calibration versus bump-test... The difference
    • Using an IntelliDoX docking station
    • Maintenance, cleaning, and service
    • Extreme weather conditions... What to do

    Meet Shauna Park: Our Gas Detection Expert


    Shauna Park is our in-house gas detection expert. Working closely with our entire team of technical experts, Shauna uses her 18+ years of gas detection experience to support customers just like you! Between her and our team of technical experts' knowledge, you can rest assured that all of your inquiries about our products will be answered via chat, email, or phone.

    How to: Calibrate a BW Gas Detector


    Calibration is pretty important: it re-establishes a base line for your sensors so the electrochemical and the LEL catalytic bead sensor need some kind of base line. That way it knows what a concentration of gas is. You want to make sure that you do your calibration fairly frequently, every 180 days is the manufacturer's default. learn more by watching this informative video.

    How to: Bump Test a BW Gas Detector


    A bump test is a physical verification that the sensors are responding to a set amount of gas and that your visual and audible alarms are going off as they should. You can hear and see them triggering and verify that everything is basically in operating order. Watch this video to see a live demonstration!
  • Sensors ➕➖

    • BW GasAlertMicroClip X3 Sensors

    Sensor Description Learn More
    SR-H-MC BW SR-H-MC Replacement MICROceL Learn More
    SR-M-MC BW SR-M-MC Replacement MICROceL Learn More
    SR-W-MP75C BW SR-W-MP75C Replacement MICROpeL Learn More
    SR-X3P BW SR-X3P Replacement oxygen (O2) sensor Learn More
  • Resources ➕➖
    • datasheet for the Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series manual for the Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series quick start guide Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series
    Article: How to Select the Right Gas Detection Solution
    Brochure: Gas Detection - Gas Book
    Brochure: Gas Detection - Gas Book 2
    Brochure: Gas Detection - Gas Book 3
  • Forum ➕➖

    • Ask a question about Honeywell BW MicroClip X3 Single and Multi-Gas Detector Series

  • Customer Reviews ➕➖

    • Customer Reviews for the BW MCX3

    More BW Products


    • We accept these payment methods:
    • Visa, Master Card, Discover, American Express & PayPal
    • We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.