Ideal for the harshest working environments, this single-gas detector ensures constant protection against CO gas with a 0 to 300 ppm range. In addition, work with unmatched safety, reliability, and productivity with this detector that features a simple-to-use one-button operation and "Bump Check" confirmation/identification.
Ideal for the harshest working environments, this single-gas detector ensures constant protection against CO gas with a 0 to 300 ppm range. In addition, work with unmatched safety, reliability, and productivity with this detector that features a simple-to-use one-button operation and "Bump Check" confirmation/identification.
Weight | 2.7 oz. (76 g) |
Temperature | -40 to 50°C (-40 to 122°F) |
Humidity | 5% to 95% non-condensing relative humidity |
Alarms | Visual, Vibrating and Audible (minimum 95 db) |
Tests | Full function self-test on activation and every 20 hours Continuous automatic battery and sensor tests |
Ratings | IP 67/ Complies with EMC directives 89/336/EEC |
Certifications | UL 913 and CSA-22.2 No 157 Class 1 Division 1 & 2 Groups A, B, C and D ATEX: II 1 G Ex ia IIC T4 IECEX: Ex ia IIC T4 |
Measuring Range | 0 to 300 ppm |
Low Alarm Limit | 35 ppm |
High Alarm Limit | 200 ppm |
Gas detection has come a long way over the past few years. Now you can find detectors that continuously run, require little to no calibration and offer very little maintenance. This life saving tool can notify first responders and firefighters of a danger as soon as they walk through a door. Since exposure to gas can affect firefighters rapidly, this is a must have tool to accompany on any emergency call.
Portable gas detectors are used to monitor the atmosphere around an emergency professional and can be worn on clothing, attached to a belt or a backpack. These units are battery operated and transmit warnings via audible and visible signals when gases reach dangerous levels. Gas detectors can be used to identify combustible, flammable and toxic gases, and oxygen depletion depending on the need.
There are essentially two types of gas detectors: a single gas detector that is equipped to detect any single-gas hazard, or a multi-gas detector that is usually equipped with LEL (lower explosive limit), O2 (oxygen), CO (carbon monoxide) and H2S (hydrogen sulfide) sensors. This will simultaneously monitor several gases and combustibles.
Some common applications used in emergency situations are:
Gas detectors that can read LEL should be used to determine where the hot zone is. Any LEL reading on a detector indicates the presence of gas and a potential hazard. Using these meters in emergency situations can be the difference between life and death.
Personal gas detectors have gotten a lot smaller over the years but the need is greater than ever. Advancements in technology have made these tools economical for all first responders, emergency personnel and fire fighters to have on every emergency call.
Small, compact, easy to use and virtually maintenance free. It has the best sensor resolution on the market with 0.1 ppm for H2S models. The Real-time gas reading capability is also a unique feature to this product line.
It cannot be put into hibernate mode like its counterpart the SGC-P
An excellent monitor, its features make it one of the best single gas maintenance free units on the market today.
One of the most advanced maintenance free disposable single gas detector on the market today. Combining rugged design, reliability, amazing sensor resolution makes this detector fantastic. It is a good fit in virtually any application as a quick and easy safety device.
There is no need for calibration, sensor replacement, battery replacement or battery charging on this model. However, Calibration can be performed on the unit as an option if the user wants to calibrate it and regular maintenance Bump Tests can be performed on the unit depending on personal preference or when site safety regulations require it.
Other unique features on this detector include the ability to adjust the alarm set points, program it with a 6-digit ID, and allows for quick configuration adjustments to comply with current and future regulations. The built-in concussion proof boot provides excellent protection against accidental bumps, scratches and damage; and it is water-proof, with an IP rating of 67 it can be submerged in water up to 1 m deep for 30 minutes. It is also compatible with the Gas Clip Technologies Clip Dock calibration and bump test station for those who wish to use a hands-free, automated, bump test and calibration procedure.
Click on a category to view a selection of compatible accessories with the Gas Clip SGC-C Single-Gas Detector, CO, 0 to 300 ppm.
Weight | 2.7 oz. (76 g) |
Temperature | -40 to 50°C (-40 to 122°F) |
Humidity | 5% to 95% non-condensing relative humidity |
Alarms | Visual, Vibrating and Audible (minimum 95 db) |
Tests | Full function self-test on activation and every 20 hours Continuous automatic battery and sensor tests |
Ratings | IP 67/ Complies with EMC directives 89/336/EEC |
Certifications | UL 913 and CSA-22.2 No 157 Class 1 Division 1 & 2 Groups A, B, C and D ATEX: II 1 G Ex ia IIC T4 IECEX: Ex ia IIC T4 |
Measuring Range | 0 to 300 ppm |
Low Alarm Limit | 35 ppm |
High Alarm Limit | 200 ppm |
Gas detection has come a long way over the past few years. Now you can find detectors that continuously run, require little to no calibration and offer very little maintenance. This life saving tool can notify first responders and firefighters of a danger as soon as they walk through a door. Since exposure to gas can affect firefighters rapidly, this is a must have tool to accompany on any emergency call.
Portable gas detectors are used to monitor the atmosphere around an emergency professional and can be worn on clothing, attached to a belt or a backpack. These units are battery operated and transmit warnings via audible and visible signals when gases reach dangerous levels. Gas detectors can be used to identify combustible, flammable and toxic gases, and oxygen depletion depending on the need.
There are essentially two types of gas detectors: a single gas detector that is equipped to detect any single-gas hazard, or a multi-gas detector that is usually equipped with LEL (lower explosive limit), O2 (oxygen), CO (carbon monoxide) and H2S (hydrogen sulfide) sensors. This will simultaneously monitor several gases and combustibles.
Some common applications used in emergency situations are:
Gas detectors that can read LEL should be used to determine where the hot zone is. Any LEL reading on a detector indicates the presence of gas and a potential hazard. Using these meters in emergency situations can be the difference between life and death.
Personal gas detectors have gotten a lot smaller over the years but the need is greater than ever. Advancements in technology have made these tools economical for all first responders, emergency personnel and fire fighters to have on every emergency call.
Small, compact, easy to use and virtually maintenance free. It has the best sensor resolution on the market with 0.1 ppm for H2S models. The Real-time gas reading capability is also a unique feature to this product line.
It cannot be put into hibernate mode like its counterpart the SGC-P
An excellent monitor, its features make it one of the best single gas maintenance free units on the market today.
One of the most advanced maintenance free disposable single gas detector on the market today. Combining rugged design, reliability, amazing sensor resolution makes this detector fantastic. It is a good fit in virtually any application as a quick and easy safety device.
There is no need for calibration, sensor replacement, battery replacement or battery charging on this model. However, Calibration can be performed on the unit as an option if the user wants to calibrate it and regular maintenance Bump Tests can be performed on the unit depending on personal preference or when site safety regulations require it.
Other unique features on this detector include the ability to adjust the alarm set points, program it with a 6-digit ID, and allows for quick configuration adjustments to comply with current and future regulations. The built-in concussion proof boot provides excellent protection against accidental bumps, scratches and damage; and it is water-proof, with an IP rating of 67 it can be submerged in water up to 1 m deep for 30 minutes. It is also compatible with the Gas Clip Technologies Clip Dock calibration and bump test station for those who wish to use a hands-free, automated, bump test and calibration procedure.
Click on a category to view a selection of compatible accessories with the Gas Clip SGC-C Single-Gas Detector, CO, 0 to 300 ppm.