Simpson 228 AC/DC Leakage Current Tester

Télécharger: datasheet manual

This leakage current tester detects both AC and DC leakage current and simulates human response at 3 different levels.

Oui, je voudrais ajouter un certificat d’étalonnage (Modèle CERTIMM1) pour seulement $105.00 CAD

Oui, je voudrais ajouter un certificat d’étalonnage (Modèle CERTIMM1) pour seulement $105.00 CAD

This leakage current tester was designed to meet the latest UL, IEC, and ANSI specifications.

Features

Detects dangerous AC & DC leakage current present on the conductive surfaces of electrical or electronic equipment
Reaction, let-go and unweighted burn hazard network measurements
Battery-powered for maximum portability
True RMS readings
Reads in measurement indication units (MIU) up to 0.005 MIU
Output allows measurement of peak current in non-sinusoidal wave forms
Includes test leads, alligator clips, batteries and manual

Equivalent Network Component Values	Designed around IEC 990 (excluding fuse)
Current Accuracy	±2% F.S. @ 60 Hz
Meter measurement method	True RMS
Output sensitivity	Full scale meter indication equals 1V RMS (Measured with a 1 MΩ, 12 pF load)
Output accuracy	±2% of reading @ 60 Hz
Voltage Range	0 to 300 V (AC or DC)
Voltmeter frequency response	DC to 1 KHz
Power requirements	2 x 9V Batteries
Dimensions	7 x 5.25 x 3.125"
Weight	2.5 lbs (1.4 kg)

datasheet pour le Simpson 228 AC/DC Leakage Current Tester manual pour le Simpson 228 AC/DC Leakage Current Tester

This leakage current tester was designed to meet the latest UL, IEC, and ANSI specifications.

Features

Detects dangerous AC & DC leakage current present on the conductive surfaces of electrical or electronic equipment
Reaction, let-go and unweighted burn hazard network measurements
Battery-powered for maximum portability
True RMS readings
Reads in measurement indication units (MIU) up to 0.005 MIU
Output allows measurement of peak current in non-sinusoidal wave forms
Includes test leads, alligator clips, batteries and manual

Equivalent Network Component Values	Designed around IEC 990 (excluding fuse)
Current Accuracy	±2% F.S. @ 60 Hz
Meter measurement method	True RMS
Output sensitivity	Full scale meter indication equals 1V RMS (Measured with a 1 MΩ, 12 pF load)
Output accuracy	±2% of reading @ 60 Hz
Voltage Range	0 to 300 V (AC or DC)
Voltmeter frequency response	DC to 1 KHz
Power requirements	2 x 9V Batteries
Dimensions	7 x 5.25 x 3.125"
Weight	2.5 lbs (1.4 kg)