With an easy-to-use, open-top design, these static shielding bags provide static protection for ESD-sensitive electronic devices. They measure 8 x 8" and are printed with the ESD protective symbol and a lot code for traceability.
With an easy-to-use, open-top design, these static shielding bags provide static protection for ESD-sensitive electronic devices. They measure 8 x 8" and are printed with the ESD protective symbol and a lot code for traceability.
This transparent metal-in static shielding bag is designed to provide a static safe environment for ESD sensitive electronic devices. Bags are printed with an ESD protective symbol and a lot code for traceability. The 1000 Series Open-top Static Shielding Bags are manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior being static dissipative allows electrostatic charges to be removed when grounded.
Features
Tensile Strength | 4600psi, 32mpa ASTM D882 |
Puncture Resistance | 12lbs, 53 N MIL-STD-3010C Method 2065 |
Seal Strength | 11lbs, 48 N ASTM D882 |
Thickness | 2.8mils, 0.07mm +/-10% MIL-STD-3010C Method 1003 |
Marking Adhesion | Pass IPC-TM-650 2.4.1 |
Transparency | 40% Tobias |
ESD Shielding | <10nJ ANSI/ESD STM11.31 |
Surface Resistance-Interior | 1 x 104 to < 1 x 1011ohms ANSI/ESD STM11.11 |
Surface Resistance-Exterior | < 1 x 1011ohms ANSI/ESD STM11.11 |
Static Decay | < 2 seconds ETS 406D |
Tensile Strength | 4600psi, 32mpa ASTM D882 |
Puncture Resistance | 12lbs, 53 N MIL-STD-3010C Method 2065 |
Seal Strength | 11lbs, 48 N ASTM D882 |
Thickness | 2.8mils, 0.07mm +/-10% MIL-STD-3010C Method 1003 |
Marking Adhesion | Pass IPC-TM-650 2.4.1 |
Transparency | 40% Tobias |
ESD Shielding | <10nJ ANSI/ESD STM11.31 |
Surface Resistance-Interior | 1 x 104 to < 1 x 1011ohms ANSI/ESD STM11.11 |
Surface Resistance-Exterior | < 1 x 1011ohms ANSI/ESD STM11.11 |
Static Decay | < 2 seconds ETS 406D |