Specially designed to find faults in underfloor heating cables using a thermal imaging camera (sold separately), this cable fault locator detects faulty hot spots in heating cables through high-voltage pulses. In addition, this fault locator has a pulse rate of approximately four pulses per second.
Specially designed to find faults in underfloor heating cables using a thermal imaging camera (sold separately), this cable fault locator detects faulty hot spots in heating cables through high-voltage pulses. In addition, this fault locator has a pulse rate of approximately four pulses per second.
| Input | 120 V/single-phase/60 V |
| Output | Adjustable from 0 to 1300 V AC and from 0 to 1700 V DC Current: 115 mA maximum |
| Voltmeter | 0 to 1500 V AC and 0 to 2000 V DC Accuracy: ±5% of full scale |
| Pulse Mode | Pulse rate is approximately 4 pulses per second |
| Indicators | 4 lights (power-on, high-voltage-on, line-fault and current flowing) |
| Control | One input on/off circuit-breaker, one fuse, on AC and DC output switch, one high-voltage output push-button to be held by the operator during the complete test and safety device for faulty power-outlet |
| Leads | One input line-cord, one high-voltage lead c/w a clip and one ground lead c/w a clip. Each is 6' (2 m) long |
| Dimensions | 19 x 15.5 x 7" (48 x 39 x 18 cm) |
| Weight | 22 lbs (10 kg) |
