Amprobe ACD-14 TRMS-PLUS Dual Display Digital Clamp Multimeter

Modèle: ACD-14-TRMS-PLUS | CUP: 095969436090

Amprobe ACD-14 TRMS-PLUS Dual Display Digital Clamp Multimeter

Modèle: ACD-14-TRMS-PLUS | CUP: 095969436090

Its dual displays allows viewing amperage and voltage simultaneously. True RMS voltage and current measurements for more precise results when measuring in noisy AC environments.

Its dual displays allows viewing amperage and voltage simultaneously. True RMS voltage and current measurements for more precise results when measuring in noisy AC environments.

Prix spécial $366.21 CAD
Prix régulier $416.15 CAD
Disponibilité 1 à 2 semaines
Quantité

Certificat d’étalonnage interne certifié ISO pour votre ACD-14-TRMS-PLUS

Certificat d’étalonnage interne certifié ISO pour votre ACD-14-TRMS-PLUS

Amprobe ACD-14-TRMS-PLUS Offers

Features

  • Dual displays – permits simultaneous reading of amperage and voltage
  • True-RMS for precise measurement results
  • New thin jaws, 5mm thinner than others to access tight measurement spaces
  • Micro Amps measurement for testing flame sensors
  • Capacitance to 3000 µF
  • Temperature withK-type thermocouple probe
  • AC and DC Voltage to 600V
  • Resistance to 40MΩ
  • AC Current to 600A
  • Frequency measurement
  • Diode test and continuity buzzer
  • Hold and maximum reading functions
  • In rush current
  • Accommodates conductors up to 28 mm (1.1) in diameter
  • Auto ranging
  • Auto power off and low battery indication
  • Rubber over-molded case

Amprobe ACD-14-TRMS-PLUS Specifications

Display 3-3/4 digits 4000 counts, dual LCD displays
Update Rate 3 per second nominal
Low Battery Indication Below approx. 2.4V
Operating Temperature 32°F to 104°F (0°C to 40°C)
Relative Humidity Maximum relative humidity 80% for temperatures up to 31°C (88°F) decreasing linearly to 50% relative humidity at 40°C (104°F)
Altitude Indoor operation below 2000m (6,562 ft)
Temperature Coefficient Nominal 0.15 x (specified accuracy)/°F @ 0°C - 18°C or 28°C - 40°C (32°F -64°F or 82°F - 104°F), or otherwise specified
Sensing Average sensing for ACD-14 FX
Power Supply Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032)
Battery Life 95 hours approx. (in DCV mode)
Power Consumption 2.5 mA typical for ACD-14 FX
Auto Power Off After being idle for 30 minutes
APO Consumption ACD-14 TRMS-PLUS: 0.8μA typical except 25μA typical for temperature function
Transient Protection 6.5kV (1.2/50μs surge) for all models
Overload Protections ACA Clamp-on jaws: AC 600A RMS continuous "+" & "COM" terminals (all functions): 600VDC/VAC RMS
Cliquer ici pour toutes les spécifications du Amprobe ACD-14-TRMS-PLUS

What's included with the Amprobe ACD-14-TRMS-PLUS

  • Clamp-on Multimeter
  • Test Leads
  • Bead Type-K Thermocouple with banana plug
  • Carrying Case
  • Users Manual

Introducing the Amprobe ACD-14 Dual Display Clamp Multimeter


This introductory video will go over the main features of this dual display clamp multimeter. Additionally, this unit features True RMS capabilities.

Poser une question sur le Amprobe ACD-14 TRMS-PLUS Dual Display Digital Clamp Multimeter

Amprobe ACD-14-TRMS-PLUS Offers

Features

  • Dual displays – permits simultaneous reading of amperage and voltage
  • True-RMS for precise measurement results
  • New thin jaws, 5mm thinner than others to access tight measurement spaces
  • Micro Amps measurement for testing flame sensors
  • Capacitance to 3000 µF
  • Temperature withK-type thermocouple probe
  • AC and DC Voltage to 600V
  • Resistance to 40MΩ
  • AC Current to 600A
  • Frequency measurement
  • Diode test and continuity buzzer
  • Hold and maximum reading functions
  • In rush current
  • Accommodates conductors up to 28 mm (1.1) in diameter
  • Auto ranging
  • Auto power off and low battery indication
  • Rubber over-molded case

Amprobe ACD-14-TRMS-PLUS Specifications

Display 3-3/4 digits 4000 counts, dual LCD displays
Update Rate 3 per second nominal
Low Battery Indication Below approx. 2.4V
Operating Temperature 32°F to 104°F (0°C to 40°C)
Relative Humidity Maximum relative humidity 80% for temperatures up to 31°C (88°F) decreasing linearly to 50% relative humidity at 40°C (104°F)
Altitude Indoor operation below 2000m (6,562 ft)
Temperature Coefficient Nominal 0.15 x (specified accuracy)/°F @ 0°C - 18°C or 28°C - 40°C (32°F -64°F or 82°F - 104°F), or otherwise specified
Sensing Average sensing for ACD-14 FX
Power Supply Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032)
Battery Life 95 hours approx. (in DCV mode)
Power Consumption 2.5 mA typical for ACD-14 FX
Auto Power Off After being idle for 30 minutes
APO Consumption ACD-14 TRMS-PLUS: 0.8μA typical except 25μA typical for temperature function
Transient Protection 6.5kV (1.2/50μs surge) for all models
Overload Protections ACA Clamp-on jaws: AC 600A RMS continuous "+" & "COM" terminals (all functions): 600VDC/VAC RMS
Cliquer ici pour toutes les spécifications du Amprobe ACD-14-TRMS-PLUS

What's included with the Amprobe ACD-14-TRMS-PLUS

  • Clamp-on Multimeter
  • Test Leads
  • Bead Type-K Thermocouple with banana plug
  • Carrying Case
  • Users Manual

Introducing the Amprobe ACD-14 Dual Display Clamp Multimeter


This introductory video will go over the main features of this dual display clamp multimeter. Additionally, this unit features True RMS capabilities.

Poser une question sur le Amprobe ACD-14 TRMS-PLUS Dual Display Digital Clamp Multimeter

Plus de produits Amprobe