Wear Yellow. Work Safe.
Transcript: A bump test is a physical verification that the sensors are responding to a set amount of gas and that your visual and audible alarms are going off as they should. You can hear and see them triggering and verify that everything is basically in operating order.
Today we are going to do a bump test on our MicroClip XT Gas Detector.
So the first step is to turn your MicroClip on. While you're waiting for the unit to turn on; you can make sure that your test cap and hoses are all attached together as they should be to your bump gas cylinder.
Now we are in operating mode, and we are going to go ahead and attach our test cap to unit. It fits in the little groves on a side and then just push down until you hear it click. Put the test cap on, pinch the hose in the middle. Fill our balloon with the gas, and then release the pinch. Watch for the unit to go into alarm.
Le calibrage est une étape importante pour assurer que l’alarme de votre détecteur de gaz retentira lorsque le seuil approprié sera dépassé. Vous pouvez le faire sur le terrain à l’aide d’un kit de calibrage, et cela ne prend que quelques minutes!
Vous verrez comment désassembler votre détecteur de gaz pour l’entretien régulier. Les divers capteurs de gaz sont faciles à changer et remplacer sur le terrain, si vous suivez ces étapes.
