CableMaster 800 offers a multitude of network diagnostics features for trouble-shooting such as cable tracing, link detection up to 1Gb/s, Ping, network discovery, PoE.
CableMaster 800 offers a multitude of network diagnostics features for trouble-shooting such as cable tracing, link detection up to 1Gb/s, Ping, network discovery, PoE.
CableMaster 800 is a professional cable tester equipped with an RJ45 jack for network cables and an F-type connector for coaxial cables. The CableMaster 800 verifies the wire map, determines the cable length and distance to the fault. The results can be saved and documented using the PC-based reporting software.
Features
Applications
Measurement Technology | Time Domain Reflectometry (TDR) |
Cable Measurements | Cable Testing and ID: up to 1,000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m) Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft) Supports 8 continuity and ID numbers remotes (RJ 45) Supports 20 RJ 45 and 20 F connector ID only remotes |
Power over Ethernet | Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts (at class 4 Identifies Mode A or B (pairs with PoE) |
Active Ethernet | Indicates advertised speeds of 10/100/1000 base-T half or full duplex
Can Link to network at 10/100 base-T |
Network Discovery Test | Discovers and displays attached network devices
Ping IPv4/URL/IPv6 DHCP/DNS Test LLDP/CDP identification TCP/UDP Connectivity test Port LED blink link in 0,1 Hz-steps |
Reporting | PDF/CSV reports with PC- Software |
Maximum Voltage | Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester
RJ Jack: 66 Vdc or 55 Vac F-connector: 50 Vdc or Vac |
Save Test Results | Stores up to 250 Cable or network tests with user defined names |
Tone Generation | Tone Frequencies: 730 Hz and 1440 Hz |
Languages | English, French, German, Spanish |
Battery Life | For 6xAA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating - 20 hours typical Standby - 1.5 years typical (200 uA max standby current), Batteries are included |
Altitude | 10.000 ft (3048 m) operating |
Temperature | Operating: 32 to 122°F (0 to 50°C)
Storage: -22 to 140°F (-30 to 60°) |
Humidity | 10 to 90% non-condensing |
Measurement Technology | Time Domain Reflectometry (TDR) |
Cable Measurements | Cable Testing and ID: up to 1,000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m) Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft) Supports 8 continuity and ID numbers remotes (RJ 45) Supports 20 RJ 45 and 20 F connector ID only remotes |
Power over Ethernet | Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts (at class 4 Identifies Mode A or B (pairs with PoE) |
Active Ethernet | Indicates advertised speeds of 10/100/1000 base-T half or full duplex
Can Link to network at 10/100 base-T |
Network Discovery Test | Discovers and displays attached network devices
Ping IPv4/URL/IPv6 DHCP/DNS Test LLDP/CDP identification TCP/UDP Connectivity test Port LED blink link in 0,1 Hz-steps |
Reporting | PDF/CSV reports with PC- Software |
Maximum Voltage | Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester
RJ Jack: 66 Vdc or 55 Vac F-connector: 50 Vdc or Vac |
Save Test Results | Stores up to 250 Cable or network tests with user defined names |
Tone Generation | Tone Frequencies: 730 Hz and 1440 Hz |
Languages | English, French, German, Spanish |
Battery Life | For 6xAA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating - 20 hours typical Standby - 1.5 years typical (200 uA max standby current), Batteries are included |
Altitude | 10.000 ft (3048 m) operating |
Temperature | Operating: 32 to 122°F (0 to 50°C)
Storage: -22 to 140°F (-30 to 60°) |
Humidity | 10 to 90% non-condensing |