Continuously monitor the operation of a wrist strap grounding system for 1 operator and ground point. This wrist strap monitor meets the requirements of ANSI/ESD S20.20 and recommendations of ESD Handbook ESD TR20.20.
Continuously monitor the operation of a wrist strap grounding system for 1 operator and ground point. This wrist strap monitor meets the requirements of ANSI/ESD S20.20 and recommendations of ESD Handbook ESD TR20.20.
This Wrist Strap Monitor is designed to monitor the operation of a wrist strap grounding system for a single operator. This product has been designed and tested for use with SCS Dual Conductor Wrist Straps and SCS Worksurfaces Grounding Systems. This unit is powered by a 9V alkaline battery. Use of other components or use in any other application not evaluated by the manufacturer may cause improper performance and/or an unsafe condition. To avoid damage to the Wrist Strap Monitor, do not use this monitor outside of the operating conditions listed in this user guide.
Features
Accuracy | ±15% |
Test Voltage | 9VDC open circuit |
Test Current | Less than 1microamp |
Dimensions (L x W x H) | 2.5 x 2.6 x 1.1" (63.5 x 66 x 27.9mm) |
Power Supply Requirements | 9V alkaline battery recommended (not supplied) |
Temperature Maximum | 110°F (43°C) |
Temperature Minimum | 50°F (10°C) |
Humidity | Maximum relative humidity 75% |
Accuracy | ±15% |
Test Voltage | 9VDC open circuit |
Test Current | Less than 1microamp |
Dimensions (L x W x H) | 2.5 x 2.6 x 1.1" (63.5 x 66 x 27.9mm) |
Power Supply Requirements | 9V alkaline battery recommended (not supplied) |
Temperature Maximum | 110°F (43°C) |
Temperature Minimum | 50°F (10°C) |
Humidity | Maximum relative humidity 75% |