With high puncture resistance and lightweight ESD protective packaging, these cushioned static shield bags absorb impact to help prevent product damage. The 100-pack of 16 x 15in bags eliminate the need to cut and tape loose pieces of bubble wrap or add packaging layers.
With high puncture resistance and lightweight ESD protective packaging, these cushioned static shield bags absorb impact to help prevent product damage. The 100-pack of 16 x 15in bags eliminate the need to cut and tape loose pieces of bubble wrap or add packaging layers.
This static shield bag allows bags to be used throughout an ESD-protected area and grounded when placed on a grounded surface or handled by a grounded operator.
Features
Packaging Materials for ESD Sensitive Items | ANSI/ESD S541 (ANSI/ESD S20.20) |
Static Control Bag - Level 3 (Except Transparency) | ANSI/ESD S11.4 |
Surface Resistance: | Outer Surface: 1 x 10&sup4; to < 1 x 10¹1;Ω (Test Method), ANSI/ESD STM11.11 (Test Procedures/Method); Inner Surface: 1 x 10&sup4; to < 1 x 10¹1;Ω (Test Method), ANSI/ESD STM11.11 (Test Procedures/Method); Discharge Shielding: <20 nJ (Test Method), ANSI/ESD STM11.31, EIA 541 (Test Procedures/Method) |
Material Thickness: | Thickness: Nominal 0.15in (3.8mm) ±10% (Test Method), MIL-STD-3010, 1003 (Test Procedures/Method); Seal Strength: >7lbs/in (Test Method), 375°F (190.56°C), 0.5 sec, 60psi (Test Procedures/Method); Puncture Resistance: >20lbs (>9.07kg) (Test Method), MIL-STD-3010, 2065 (Test Procedures/Method) |
Silicone | Typical Value: Not detected; Test Procedures/Method: ASTM E 168 |
Packaging Materials for ESD Sensitive Items | ANSI/ESD S541 (ANSI/ESD S20.20) |
Static Control Bag - Level 3 (Except Transparency) | ANSI/ESD S11.4 |
Surface Resistance: | Outer Surface: 1 x 10&sup4; to < 1 x 10¹1;Ω (Test Method), ANSI/ESD STM11.11 (Test Procedures/Method); Inner Surface: 1 x 10&sup4; to < 1 x 10¹1;Ω (Test Method), ANSI/ESD STM11.11 (Test Procedures/Method); Discharge Shielding: <20 nJ (Test Method), ANSI/ESD STM11.31, EIA 541 (Test Procedures/Method) |
Material Thickness: | Thickness: Nominal 0.15in (3.8mm) ±10% (Test Method), MIL-STD-3010, 1003 (Test Procedures/Method); Seal Strength: >7lbs/in (Test Method), 375°F (190.56°C), 0.5 sec, 60psi (Test Procedures/Method); Puncture Resistance: >20lbs (>9.07kg) (Test Method), MIL-STD-3010, 2065 (Test Procedures/Method) |
Silicone | Typical Value: Not detected; Test Procedures/Method: ASTM E 168 |