Powerful and portable, this multi-gas detector provides LEL, PPM, hydrogen sulfide (H2S), oxygen (O2), and carbon monoxide (CO) detection at the push of a button. In addition, this detector features data logging and a powerful internal pump with a low-flow auto shut-off and alarm, which can draw samples from up to 125' (38.1 m).
Powerful and portable, this multi-gas detector provides LEL, PPM, hydrogen sulfide (H2S), oxygen (O2), and carbon monoxide (CO) detection at the push of a button. In addition, this detector features data logging and a powerful internal pump with a low-flow auto shut-off and alarm, which can draw samples from up to 125' (38.1 m).
Outfitted with a strong, internal low-flow pump, the RKI 724-001 EAGLE 2 Gas Detector is capable of drawing samples from up to 125' (38.1 m). The pump boasts auto shut-off and an alarm for simple operation, and the detector is designed for LEL and ppm detection of oxygen, hydrogen sulfide and carbon dioxide. The data logging feature allows you to review the measurements later.
Features
Oxygen (O2) | Measuring range: 0 to 40% Vol Accuracy: ± 0.5% O2 |
Hydrogen Sulfide (H2S) | Measuring range: 0 to 100 ppm Accuracy: ± 5% of reading or ± 2 ppm H2S (Which ever is greater) |
Carbon Monoxide (CO) | Measuring range: 0 to 500 ppm Accuracy: ± 5% of reading or ± 5 ppm CO (Which ever is greater) |
Detection Principle | Catalytic combustion, electrochemical cell, galvanic cell, infrared, photoionization detector, and thermal conductivity |
Sampling Method | Powerful, long-life internal pump (over 6000 hours) can draw samples over 125' (38.1 m). Flow rate approximately 2.0 SCFH |
Response Time | 30 seconds to 90% (for most gases) using standard 5' (1.52 m) hose |
Controls | 4 external glove friendly push buttons for operation, demand zero, and auto calibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features |
Alarms | 2 alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable Method: Buzzer 95 dB at 11.81" (30 cm), four high intensity LED’s |
Safety Rating | Intrinsically safe, Class I, Groups A, B, C, D. Approvals: CSA/CE |
Environmental | IP-64 |
Enclosure | Weatherproof, chemical resistant, RFI/EMI coated high impact polycarbonate-PBT blend. Can operate in 2" (5.08 cm) of water without leakage. Ergonomically balanced with rugged top mounted handle. Water and dust resistant equivalent to IP64. |
Operating Temperature and Humidity | -4 to 122°F (-20 to 50°C), 0 to 95% RH, non-condensing |
Language | Readout can display in 5 languages (English, French, German, Italian, or Spanish) |
Display | 3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand, with adjustable time |
Power | Source: 4 alkaline or NiMH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines) Continuous operation: At 70°F (21.11°C), 18 hours using alkaline batteries, or 20 hours using NiMH |
Dimensions | 9.5 x 5.25 x 5.875" (24.13 x 13.33 x 14.92 cm) |
Weight | 3.8 lbs (1.72 g), standard 4 gas with batteries |
Oxygen (O2) | Measuring range: 0 to 40% Vol Accuracy: ± 0.5% O2 |
Hydrogen Sulfide (H2S) | Measuring range: 0 to 100 ppm Accuracy: ± 5% of reading or ± 2 ppm H2S (Which ever is greater) |
Carbon Monoxide (CO) | Measuring range: 0 to 500 ppm Accuracy: ± 5% of reading or ± 5 ppm CO (Which ever is greater) |
Detection Principle | Catalytic combustion, electrochemical cell, galvanic cell, infrared, photoionization detector, and thermal conductivity |
Sampling Method | Powerful, long-life internal pump (over 6000 hours) can draw samples over 125' (38.1 m). Flow rate approximately 2.0 SCFH |
Response Time | 30 seconds to 90% (for most gases) using standard 5' (1.52 m) hose |
Controls | 4 external glove friendly push buttons for operation, demand zero, and auto calibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features |
Alarms | 2 alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable Method: Buzzer 95 dB at 11.81" (30 cm), four high intensity LED’s |
Safety Rating | Intrinsically safe, Class I, Groups A, B, C, D. Approvals: CSA/CE |
Environmental | IP-64 |
Enclosure | Weatherproof, chemical resistant, RFI/EMI coated high impact polycarbonate-PBT blend. Can operate in 2" (5.08 cm) of water without leakage. Ergonomically balanced with rugged top mounted handle. Water and dust resistant equivalent to IP64. |
Operating Temperature and Humidity | -4 to 122°F (-20 to 50°C), 0 to 95% RH, non-condensing |
Language | Readout can display in 5 languages (English, French, German, Italian, or Spanish) |
Display | 3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand, with adjustable time |
Power | Source: 4 alkaline or NiMH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines) Continuous operation: At 70°F (21.11°C), 18 hours using alkaline batteries, or 20 hours using NiMH |
Dimensions | 9.5 x 5.25 x 5.875" (24.13 x 13.33 x 14.92 cm) |
Weight | 3.8 lbs (1.72 g), standard 4 gas with batteries |