Ideal for tension and compression force testing in numerous applications up to 500 lbF (2500 N), this gauge features a sampling rate of 3000 Hz for accurate results under a wide range of test conditions. In addition, the backlit graphic LCD has sizeable characters, and the available menu accesses its features and configurable parameters.
Ideal for tension and compression force testing in numerous applications up to 500 lbF (2500 N), this gauge features a sampling rate of 3000 Hz for accurate results under a wide range of test conditions. In addition, the backlit graphic LCD has sizeable characters, and the available menu accesses its features and configurable parameters.
Ruggedly built for years of service in laboratory and industrial environments, this force gauge features onboard data memory for up to 50 readings and statistical calculations with output to a PC. Integrated set points with indicators and outputs are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. In addition, it is overload-protected to 200% capacity and displays an analog load bar for the graphical representation of an applied force.
Features
Applications
Capacity x Resolution | 500 x 0.2 lbF 8000 x 5 ozF 250 x 0.1 kgF 2500 x 1 N 2.5 x 0.001 kN |
Accuracy | ±0.2% of full scale |
Sampling Rate | 3000 Hz, pulse response of 1/1500 seconds minimum |
Outputs | USB/RS-232: Configurable up to 115,200 baud Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog: ±1 V DC, ±0.25% of full scale at capacity General purpose: Three open drain outputs, one input Set points: Three open drain lines |
Configurable Settings | Digital filters, outputs, automatic shutoff, default settings, key tones, audio alarms, calibration |
Safe Overload | 200% of full scale (display shows "OVER" at 110% and above) |
Load Cell Deflection | 0.010 (0.25) |
Environmental Requirements | 40 to 100°F (4 to 37.7°C), maximum 96% humidity, non-condensing |
Power | AC adapter: 100 to 240 V AC, 50 to 60 Hz, 0.3 A Battery: Rechargeable 8.4 V NiMH Low battery indicator appears when battery level is low, and gauge powers off automatically when power reaches critical stage Battery life: Up to 7/24 hours of continuous use (backlight on/off) |
Thread | 5⁄16-18 UNC |
Dimensions | 2.53 x 1.32 x 5.88" (64.3 x 33.6 x 149.4 mm) |
Weight | 1.2 lbs (0.54 kg) |
Click on a category to view a selection of compatible accessories with the Mark-10 M4-500 Series 4 Advanced Digital Force Gauge, 500 x 0.2 lbF.
Capacity x Resolution | 500 x 0.2 lbF 8000 x 5 ozF 250 x 0.1 kgF 2500 x 1 N 2.5 x 0.001 kN |
Accuracy | ±0.2% of full scale |
Sampling Rate | 3000 Hz, pulse response of 1/1500 seconds minimum |
Outputs | USB/RS-232: Configurable up to 115,200 baud Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog: ±1 V DC, ±0.25% of full scale at capacity General purpose: Three open drain outputs, one input Set points: Three open drain lines |
Configurable Settings | Digital filters, outputs, automatic shutoff, default settings, key tones, audio alarms, calibration |
Safe Overload | 200% of full scale (display shows "OVER" at 110% and above) |
Load Cell Deflection | 0.010 (0.25) |
Environmental Requirements | 40 to 100°F (4 to 37.7°C), maximum 96% humidity, non-condensing |
Power | AC adapter: 100 to 240 V AC, 50 to 60 Hz, 0.3 A Battery: Rechargeable 8.4 V NiMH Low battery indicator appears when battery level is low, and gauge powers off automatically when power reaches critical stage Battery life: Up to 7/24 hours of continuous use (backlight on/off) |
Thread | 5⁄16-18 UNC |
Dimensions | 2.53 x 1.32 x 5.88" (64.3 x 33.6 x 149.4 mm) |
Weight | 1.2 lbs (0.54 kg) |
Click on a category to view a selection of compatible accessories with the Mark-10 M4-500 Series 4 Advanced Digital Force Gauge, 500 x 0.2 lbF.