High-frequency switching power supply option for the Laureate™ digital panel meters, digital counters, and 6-digit remote displays. Operates from a low voltage power of 10 to 48 V DC or 12 to 30 V AC, 47 to 63 Hz allowing power from batteries or 28 V AC, 400 Hz aircraft power.
High-frequency switching power supply option for the Laureate™ digital panel meters, digital counters, and 6-digit remote displays. Operates from a low voltage power of 10 to 48 V DC or 12 to 30 V AC, 47 to 63 Hz allowing power from batteries or 28 V AC, 400 Hz aircraft power.
Offers high-frequency switching power for the Laureate™ instruments providing stable, isolated power with excitation outputs. There is no need for an expensive external supply since it provides three jumper-selectable, isolated excitation outputs used to power external sensors, transmitters and up to four 350 ohm load cells in parallel. The power supply and connectors are approved by UL/IEC/CSA to be safe and features two connector inputs (A & B) and a digital ground for signals such as meter hold, reset, tare, etc.
Features
Operating Power | 12 to 32 Vac or 10 to 48 Vdc |
Frequency | DC and 47 to 63 Hz |
Power Consumption | 5.3 W max |
Protection | On-board fuse rated 2.5A at 250 Vac or 63 Vdc, UL Recognized |
Excitation Power Supply Selectable Outputs | 5 Vdc ±5%, 100 mA 10 Vdc ±5%, 120 mA 24 Vdc ±5%, 50 mA |
Ripple | 50 mVp-p max |
Isolation to power ground | 250V rms working, 2.3 kV rms per 1 min test |
Isolation to meter ground | 50 Vp |
Range | 0 to 10000 psi |
Accuracy | 0.5% FSO |
Thread | ½-20 UNF |
Stem Length | 6" (153 mm) |
Output Signal | 0 to 10 Vdc |
Measurement Principle | Extensimetric |
Maximum Overpressure | 2 x FS 1.5 x FS above 1000 bar/ 15000 psi |
Maximum Current Absorption | 25 mA |
Protection Degree | IP65 |
Electrical Connections | 6-pin |
Operating Power | 12 to 32 Vac or 10 to 48 Vdc |
Frequency | DC and 47 to 63 Hz |
Power Consumption | 5.3 W max |
Protection | On-board fuse rated 2.5A at 250 Vac or 63 Vdc, UL Recognized |
Excitation Power Supply Selectable Outputs | 5 Vdc ±5%, 100 mA 10 Vdc ±5%, 120 mA 24 Vdc ±5%, 50 mA |
Ripple | 50 mVp-p max |
Isolation to power ground | 250V rms working, 2.3 kV rms per 1 min test |
Isolation to meter ground | 50 Vp |
Range | 0 to 10000 psi |
Accuracy | 0.5% FSO |
Thread | ½-20 UNF |
Stem Length | 6" (153 mm) |
Output Signal | 0 to 10 Vdc |
Measurement Principle | Extensimetric |
Maximum Overpressure | 2 x FS 1.5 x FS above 1000 bar/ 15000 psi |
Maximum Current Absorption | 25 mA |
Protection Degree | IP65 |
Electrical Connections | 6-pin |