GPI 113255-1 (01A31GM) 1" NPT Aluminum Fuel Flow Meter, 3 to 30 GPM

Downloads: datasheet manual

Compact and lightweight, this meter is designed for use on a hose. 3 to 30 GPM, NPT thread, and two totals (accumulative and batch).

Features

Compact, lightweight and easy to use – weighs just 12oz
Aluminum housing for rust-resistant performance
Meter may be installed in-line either horizontally or vertically, or at the end of the hose adjacent to the nozzle
When installed and used correctly, inaccuracies of no greater than +5% will be obtained
Designed to be virtually maintenance-free when used properly
Features large 4-digit LCD display for easy readings of 3 to 30 GPM
Tested and approved for kerosene, diesel (biodiesel blends B20) or gasoline (ethanol blends E15)
1in. NPT threads with 3/4" reducer fittings included
Can provide cumulative and batch totals
Features an operating temperature range of 14 to 130°F (-10 to 54°C)
Manual or automatic on
Automatic off

Applications

Ideal for the following applications: Large Fleet Truck Stations, Organizations, and Construction Sites.

Inner Diameter	1 in.
Design Type	Turbine
Fitting	NPT
Accuracy	±5.0 %
Repeatability	±0.5 %
Flow Range	3 to 30 GPM, 10 to 100 LPM
Operating Temperature	+14 to +130 ºF, -10 to +54 ºC
Display	LCD
Reads	Gallons
Electronic Choice	Two totals
Powered By	Two AAA Batteries
Pressure Rating	300 PSI, 21 bar
Wetted Materials	Aluminum Housing, Nylon Rotor, Ceramic Bearings, Tungsten Carbridge Shaft, 316 Stainless Steel Rings, Kerosene
Do Not Use With	Water or Chemicals
Warranty	2 Years

datasheet for the GPI 113255-1 (01A31GM) 1" NPT Aluminum Fuel Flow Meter, 3 to 30 GPM manual for the GPI 113255-1 (01A31GM) 1" NPT Aluminum Fuel Flow Meter, 3 to 30 GPM

Features

Compact, lightweight and easy to use – weighs just 12oz
Aluminum housing for rust-resistant performance
Meter may be installed in-line either horizontally or vertically, or at the end of the hose adjacent to the nozzle
When installed and used correctly, inaccuracies of no greater than +5% will be obtained
Designed to be virtually maintenance-free when used properly
Features large 4-digit LCD display for easy readings of 3 to 30 GPM
Tested and approved for kerosene, diesel (biodiesel blends B20) or gasoline (ethanol blends E15)
1in. NPT threads with 3/4" reducer fittings included
Can provide cumulative and batch totals
Features an operating temperature range of 14 to 130°F (-10 to 54°C)
Manual or automatic on
Automatic off

Applications

Ideal for the following applications: Large Fleet Truck Stations, Organizations, and Construction Sites.

Inner Diameter	1 in.
Design Type	Turbine
Fitting	NPT
Accuracy	±5.0 %
Repeatability	±0.5 %
Flow Range	3 to 30 GPM, 10 to 100 LPM
Operating Temperature	+14 to +130 ºF, -10 to +54 ºC
Display	LCD
Reads	Gallons
Electronic Choice	Two totals
Powered By	Two AAA Batteries
Pressure Rating	300 PSI, 21 bar
Wetted Materials	Aluminum Housing, Nylon Rotor, Ceramic Bearings, Tungsten Carbridge Shaft, 316 Stainless Steel Rings, Kerosene
Do Not Use With	Water or Chemicals
Warranty	2 Years