Calibrate high-pressure devices using this hydraulic deadweight tester with a 500 to 60,000psi range. The deadweight tester has a piston float reference, which allows you to quickly see when the piston is in an ideal position.
Calibrate high-pressure devices using this hydraulic deadweight tester with a 500 to 60,000psi range. The deadweight tester has a piston float reference, which allows you to quickly see when the piston is in an ideal position.
This hydraulic tester has mass set that can be trimmed to local gravity FOC.
Features
Pressure Ranges | 500 to 30,000psi, or 40 to 2,000bar, or 4 to 200mPa, or 40 to 2,000kgf/cm2 |
Standard Weight Material | Series 3 non-magnetic, austenitic, stainless steel |
Weight Density | 7.8g/cm3 |
Piston Material | Tungsten carbide with nickel binder |
Cylinder Material | Tungsten carbide with cobalt binder |
Thermal Coefficient of Expansion | 11ppm/°C |
Test Port Adapters | 9/16 - 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP and 3/4 BSP |
Reservoir Volume | 235cc (14.3in3) |
Intensifier Ratio | 7 to 1 |
Seal Materials | Nitrile |
Operating Fluid | Dioctyl Sebacate (DOS), our reference 55-600 |
Click on a category to view a selection of compatible accessories with the Fluke P3860-PSI Hydraulic Deadweight Tester, 500 to 60,000psi.
Pressure Ranges | 500 to 30,000psi, or 40 to 2,000bar, or 4 to 200mPa, or 40 to 2,000kgf/cm2 |
Standard Weight Material | Series 3 non-magnetic, austenitic, stainless steel |
Weight Density | 7.8g/cm3 |
Piston Material | Tungsten carbide with nickel binder |
Cylinder Material | Tungsten carbide with cobalt binder |
Thermal Coefficient of Expansion | 11ppm/°C |
Test Port Adapters | 9/16 - 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP and 3/4 BSP |
Reservoir Volume | 235cc (14.3in3) |
Intensifier Ratio | 7 to 1 |
Seal Materials | Nitrile |
Operating Fluid | Dioctyl Sebacate (DOS), our reference 55-600 |
Click on a category to view a selection of compatible accessories with the Fluke P3860-PSI Hydraulic Deadweight Tester, 500 to 60,000psi.