- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Compatible with the A1, G2, TM, and 03 Series digital turbine meters, this remote assembly kit modifies the meters for applications in specialized situations, including remote indication and high/low fluid temperature metering. In addition, this kit comes with a sensor module, a dust cover assembly, and 10' (3 m) of cable.
Compatible with the A1, G2, TM, and 03 Series digital turbine meters, this remote assembly kit modifies the meters for applications in specialized situations, including remote indication and high/low fluid temperature metering. In addition, this kit comes with a sensor module, a dust cover assembly, and 10' (3 m) of cable.
Provides the versatility of panel mounting of the LCD readout up to 100' (30 m) from the turbine, this remote assembly kit allows turbine meters to function in a wide range of specialized environments.
Features
Applications
NOTE: To maintain the Factory Mutual Approval of this kit, it must be installed in accordance with the instructions given in the owner's manual. It must also be used with a FLOMEC Factory Mutual Approved meter. When the installation is complete, the Factory Mutual decal should appear on the turbine, sensor, and dustcover. Installing this kit onto a non-FM-approved meter assembly will not make the assembly FM Approved.
| Magnetic Pickoff | 1.3 kΩ, 90 mH |
| Signal Type | Sine wave |
| Voltage | Peak-to-peak, 10 to 500 mV |
| Frequency | 11 to 608 Hz |
| Fluid Temperature Range | -40 to 250°F (-40 to 121°C)*
*Maximum depending on turbine limitations. |
| Transmission Distance | Up to 100' (30.5 m) |
| Approvals | CE, ATEX, NEMA 4, IP65, FM Approved, c-us FM Approved |
| Operational Range | 14 to 130°F (-10 to 54°C) |
| Sensor | Molded nylon 6/6 housing |
| Dustcover | Molded plastic with terminal block connection |
| Cable | 10' (3 m), two-conductor shielded, Belden #9501 |
| Magnetic Pickoff | 1.3 kΩ, 90 mH |
| Signal Type | Sine wave |
| Voltage | Peak-to-peak, 10 to 500 mV |
| Frequency | 11 to 608 Hz |
| Fluid Temperature Range | -40 to 250°F (-40 to 121°C)*
*Maximum depending on turbine limitations. |
| Transmission Distance | Up to 100' (30.5 m) |
| Approvals | CE, ATEX, NEMA 4, IP65, FM Approved, c-us FM Approved |
| Operational Range | 14 to 130°F (-10 to 54°C) |
| Sensor | Molded nylon 6/6 housing |
| Dustcover | Molded plastic with terminal block connection |
| Cable | 10' (3 m), two-conductor shielded, Belden #9501 |
