Locate potentially dangerous problems before working on live equipment with the industrial thermal imaging multimeter with IGM that features a 160 x 120 resolution and a 23 to 572°F (-5 to 300°C) measurement range. In addition, this multimeter's MSX aids in clarity, embedding edge and outline detail into the thermal images.
Locate potentially dangerous problems before working on live equipment with the industrial thermal imaging multimeter with IGM that features a 160 x 120 resolution and a 23 to 572°F (-5 to 300°C) measurement range. In addition, this multimeter's MSX aids in clarity, embedding edge and outline detail into the thermal images.
Capture and store more than 20,000 radiometric images, 100 log files, and thermal and visual video clips with this multimeter. Illuminate dimly lit areas for faster and safer inspections with this multimeter's built-in LED work light. In addition, this multimeter is compatible with the MEASURELiNK app for log comparisons, reporting, custom alarm thresholds, and multiple-meter connectivity.
Features
MSX® image enhancement
This thermal imager features the unique Multi Spectral Dynamic Imaging (MSX), which adds key details from the onboard visible light camera to the entire infrared image in real time. The result: an all-in-one, undiluted thermal picture with visible light features that lets you instantly recognize where the problematic heat pattern is. MSX is real time so you can see its results immediately on the camera's display.
IGM™ infrared guided measurement
Upgrade your testing tool with Infrared Guided Measurement IGM. Utilizing the FLIR Lepton® sensor, IGM visually guides you to hidden temperature issues so you know precisely where to focus your troubleshooting. Eliminate guesswork and boost efficiency. Impress customers by uncovering problems and showcasing solutions.
METERLiNK app
The METERLiNK® app allows you to monitor a variety of environmental and electrical conditions simultaneously with the ability to connect with up to seven FLIR compatible meters at once. METERLiNK allows you to safely capture images and monitor hazardous areas remotely and in real time. Whether you're connecting several FLIR clamp meters, digital multimeters, or any of the new METERLiNK app compatible meters, you will be able to keep tabs on key readings around your facility and easily share them with your team.
Applications
Thermal Imaging | |
Thermal Imaging Dectector | FLIR Lepton® microbolometer |
(IR) Imaging | Resolution: 160 × 120 (19,200 pixels) Field of view: 57 × 44° Spectral response: 8 to 14 μm |
Thermal Sensitivity | 150 mK (0.15°C) |
IR Image | Capture frequency: 9 Hz Color palettes: Iron, rainbow, arctic, white hot, and black hot |
Laser Pointer | Type: Class I (red) Power: ≤0.39 mW |
Laser Wavelength | 640 to 660 nm |
IR Temperature | Measurement range: 23 to 572°F (-5 to 300°C) Resolution: 0.1°F (0.1°C) Accuracy: 5.4°F (±3°C) or ±3% of the reading (whichever is greater) for temperatures 77°F (>25°C) ±5°C for temperatures 14 to 77°F (-10 to 25°C) |
Emissivity Adjustment | 0.1 to 1 (default is 0.95); select from four presets or set manually |
Scanning and Targeting | Continuous scan. Crosshairs and laser pointer targeting. |
Data Hold | The displayed reading is suspended |
Image Modes | Thermal MSX (Multi Spectral Dynamic Imaging) Thermal camera only Digital camera only |
Worklight | 1 x LED |
Visual Imaging | |
Resolution | 2 MP (1600 x 1200 pixels) |
Focus | Fixed |
Field of View | 71 x 56° |
Display | 2.8" (71.12 mm) |
Surface Brightness (cd/m2) | 362 |
Screen Brightness | High/medium/low |
Electrical Measurement | |
Display Count | 6000 |
AC/DC V | 1000 V AC RMS ±(1% + 3) 1000 V DC ±(0.09% + 3) |
AC/DC mV | AC 600 mV ±(1% + 3) DC 600.0 mV ±(0.2% + 3) |
VFD AC V | 1000 V AC RMS, ±(1.3% + 4) at 45 to 65 Hz |
AC/DC LoZ V | 1000 V AC RMS or 1000 V DC ±(1.3% + 4) |
AC/DC A | 10 A AC RMS ±(1.5% + 3) 10 A DC ±(1% + 3) |
AC/DC mA range | AC 400 mA ±(1.5% + 3) DC 400.9 mA ±(1% + 3) |
AC/DC μA range | 4000 μA AC RMS ±(1.5% + 3) 4000 μA DC ±(1% + 3) |
Non-Contact Voltage Tester (NCV) | Yes |
Frequency Counter | 100 kHz ±(0.1% + 5) |
Resistance | 6 MΩ ±(0.9% + 5), 60 MΩ ±(3% + 5) |
Continuity Check Threshold | 10 to 100 Ω |
Diode Test | 1.5 V ±0.9% |
Capacitance | 10 mF ±(4% + 5) |
Temperature, Type K Thermocouple | -40 to 752°F DMM ±(1% + 5.4°F)/IGM ±(1% + 9°F) -40 to 400°C DMM ±(1% + 3°C)/IGM ±(1% + 5°C) |
Measuring Rate | 3 samples per second |
Over and Under‐Range Indication | OL |
Static Datalogging and Storage | |
Data Storage Interval, Configurable | 1 to 99 seconds |
Readings Per Memory Set | 40,000 |
Thermal Image Storage | |
Storage Media | eMMC 4 GB |
Image File Format | Radiometric |
Maximum Number of Images | Up to 30,000 |
Video Recording | 50 minutes maximum duration 20 seconds maximum duration for file transmission |
Connectivity | |
Wireless Technology | Bluetooth BLE |
Communications Protocol | METERLiNK |
Bluetooth Range | 32' (10 m) |
Meter Data | |
Category Rating | CAT IV-600 V, CAT III-1000 V |
IP Rating | IP40 |
Drop Test | 6.6' (2 m) |
Calibration | Once per year, recommended |
General Specifications | |
Operating Ambient Temperatures and Relative Humidity (RH) | 14 to 86°F (-10 to 30°C), <85% RH 86 to 104°F (30 to 40°C), <75% RH 104 to 122°F (40 to 50°C), <45% RH |
Storage Temperature and RH | -4 to 140°F (-20 to 60°C), 0 to 80% RH (without batteries) |
Temperature Coefficient | 0.1 x (specified accuracy)/°C, 64.4°F (<18°C), 82.4°F (>28°C) |
Operating Altitude | 6560' (2000 m) |
Pollution Degree | 2 |
EMC | EN61326-1 |
Power Requirements | TA04: Rechargeable, lithium-polymer battery (3.7 V, 3050 mAh) |
Battery Life | Approximately 6.5 hours in IGM mode with display brightness set to medium brightness Approximately 10 hours in Multimeter mode set to medium brightness |
Auto Power Off | For meter: set to OFF, 2, 5, or 10 minutes For worklight only: set to OFF, 5, 15, or 30 minutes |
Certifications | ETL, FCC, CE, RCM, UKCA, FDA, EN60825, EN50689 |
Safety Standards Compliance | IEC 61010-1 CAT IV-600 V, CAT III-1000 V |
Dimensions | 7.9 x 3.8 x 2.2" (20 x 9.6 x 5.6 cm) |
Weight | 1.25 lbs (569 g) without battery (approximately) |
Thermal Imaging | |
Thermal Imaging Dectector | FLIR Lepton® microbolometer |
(IR) Imaging | Resolution: 160 × 120 (19,200 pixels) Field of view: 57 × 44° Spectral response: 8 to 14 μm |
Thermal Sensitivity | 150 mK (0.15°C) |
IR Image | Capture frequency: 9 Hz Color palettes: Iron, rainbow, arctic, white hot, and black hot |
Laser Pointer | Type: Class I (red) Power: ≤0.39 mW |
Laser Wavelength | 640 to 660 nm |
IR Temperature | Measurement range: 23 to 572°F (-5 to 300°C) Resolution: 0.1°F (0.1°C) Accuracy: 5.4°F (±3°C) or ±3% of the reading (whichever is greater) for temperatures 77°F (>25°C) ±5°C for temperatures 14 to 77°F (-10 to 25°C) |
Emissivity Adjustment | 0.1 to 1 (default is 0.95); select from four presets or set manually |
Scanning and Targeting | Continuous scan. Crosshairs and laser pointer targeting. |
Data Hold | The displayed reading is suspended |
Image Modes | Thermal MSX (Multi Spectral Dynamic Imaging) Thermal camera only Digital camera only |
Worklight | 1 x LED |
Visual Imaging | |
Resolution | 2 MP (1600 x 1200 pixels) |
Focus | Fixed |
Field of View | 71 x 56° |
Display | 2.8" (71.12 mm) |
Surface Brightness (cd/m2) | 362 |
Screen Brightness | High/medium/low |
Electrical Measurement | |
Display Count | 6000 |
AC/DC V | 1000 V AC RMS ±(1% + 3) 1000 V DC ±(0.09% + 3) |
AC/DC mV | AC 600 mV ±(1% + 3) DC 600.0 mV ±(0.2% + 3) |
VFD AC V | 1000 V AC RMS, ±(1.3% + 4) at 45 to 65 Hz |
AC/DC LoZ V | 1000 V AC RMS or 1000 V DC ±(1.3% + 4) |
AC/DC A | 10 A AC RMS ±(1.5% + 3) 10 A DC ±(1% + 3) |
AC/DC mA range | AC 400 mA ±(1.5% + 3) DC 400.9 mA ±(1% + 3) |
AC/DC μA range | 4000 μA AC RMS ±(1.5% + 3) 4000 μA DC ±(1% + 3) |
Non-Contact Voltage Tester (NCV) | Yes |
Frequency Counter | 100 kHz ±(0.1% + 5) |
Resistance | 6 MΩ ±(0.9% + 5), 60 MΩ ±(3% + 5) |
Continuity Check Threshold | 10 to 100 Ω |
Diode Test | 1.5 V ±0.9% |
Capacitance | 10 mF ±(4% + 5) |
Temperature, Type K Thermocouple | -40 to 752°F DMM ±(1% + 5.4°F)/IGM ±(1% + 9°F) -40 to 400°C DMM ±(1% + 3°C)/IGM ±(1% + 5°C) |
Measuring Rate | 3 samples per second |
Over and Under‐Range Indication | OL |
Static Datalogging and Storage | |
Data Storage Interval, Configurable | 1 to 99 seconds |
Readings Per Memory Set | 40,000 |
Thermal Image Storage | |
Storage Media | eMMC 4 GB |
Image File Format | Radiometric |
Maximum Number of Images | Up to 30,000 |
Video Recording | 50 minutes maximum duration 20 seconds maximum duration for file transmission |
Connectivity | |
Wireless Technology | Bluetooth BLE |
Communications Protocol | METERLiNK |
Bluetooth Range | 32' (10 m) |
Meter Data | |
Category Rating | CAT IV-600 V, CAT III-1000 V |
IP Rating | IP40 |
Drop Test | 6.6' (2 m) |
Calibration | Once per year, recommended |
General Specifications | |
Operating Ambient Temperatures and Relative Humidity (RH) | 14 to 86°F (-10 to 30°C), <85% RH 86 to 104°F (30 to 40°C), <75% RH 104 to 122°F (40 to 50°C), <45% RH |
Storage Temperature and RH | -4 to 140°F (-20 to 60°C), 0 to 80% RH (without batteries) |
Temperature Coefficient | 0.1 x (specified accuracy)/°C, 64.4°F (<18°C), 82.4°F (>28°C) |
Operating Altitude | 6560' (2000 m) |
Pollution Degree | 2 |
EMC | EN61326-1 |
Power Requirements | TA04: Rechargeable, lithium-polymer battery (3.7 V, 3050 mAh) |
Battery Life | Approximately 6.5 hours in IGM mode with display brightness set to medium brightness Approximately 10 hours in Multimeter mode set to medium brightness |
Auto Power Off | For meter: set to OFF, 2, 5, or 10 minutes For worklight only: set to OFF, 5, 15, or 30 minutes |
Certifications | ETL, FCC, CE, RCM, UKCA, FDA, EN60825, EN50689 |
Safety Standards Compliance | IEC 61010-1 CAT IV-600 V, CAT III-1000 V |
Dimensions | 7.9 x 3.8 x 2.2" (20 x 9.6 x 5.6 cm) |
Weight | 1.25 lbs (569 g) without battery (approximately) |