The Mark II series molded manometers are of the inclined and inclined-vertical types. Both gauge types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements.
The Mark II series molded manometers are of the inclined and inclined-vertical types. Both gauge types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements.
The curved inclined-vertical tube of the Model 25 gauge provides higher ranges with more easily read increments at low readings, and is excellent for general purpose work. The Model 40 inclined gauge provides linear calibration and excellent resolution throughout its range, and is ideally suited for air velocity and air filter gage applications.
Features
Applications
Inclined/Vertical | |
Accuracy | ±3% FS |
Temperature Limits | 140°F (60°C) |
Pressure Limits | 10 psi (70 kPa) |
Weight | 1.04 lb (472 g) |
Agency Approvals | Meets the technical requirements of EU Directive 2011/65/EU (RoHS II) |
Inclined | |
Accuracy | ±3% FS |
Temperature Limits | 150°F (65°C) |
Pressure Limits | 15 psi (100 kPa) |
Scale Length | Approx. 8¼" (21 cm) |
Weight | 1.23 lb (558 g) |
Agency Approvals | Meets the technical requirements of EU Directive 2011/65/EU (RoHS II) |
Inclined/Vertical | |
Accuracy | ±3% FS |
Temperature Limits | 140°F (60°C) |
Pressure Limits | 10 psi (70 kPa) |
Weight | 1.04 lb (472 g) |
Agency Approvals | Meets the technical requirements of EU Directive 2011/65/EU (RoHS II) |
Inclined | |
Accuracy | ±3% FS |
Temperature Limits | 150°F (65°C) |
Pressure Limits | 15 psi (100 kPa) |
Scale Length | Approx. 8¼" (21 cm) |
Weight | 1.23 lb (558 g) |
Agency Approvals | Meets the technical requirements of EU Directive 2011/65/EU (RoHS II) |