Ideal for counting and timing applications, this programmable digital counter/timer features assorted input/output operation modes and a load contact capacity of up to 5 A for many industries. In addition, this counter/timer features RS485 communication output for remote parameter configuration and monitoring via PCs.
Ideal for counting and timing applications, this programmable digital counter/timer features assorted input/output operation modes and a load contact capacity of up to 5 A for many industries. In addition, this counter/timer features RS485 communication output for remote parameter configuration and monitoring via PCs.
Features
Applications
Display | Digits: 6-digit 7-segment (counting value: red, setting value: green) LED |
Counter | Count up, count down, count up/down Counting range: -99999 to 999999 |
Timer | Count up, count down Error: Repeat/SET/voltage/temperature - Power ON start: ≤±0.01% ±0.05 second, Signal ON start: ≤±0.01% ±0.03 second |
Input Logic | Voltage input (PNP) - input impedance: 5.4 kΩ, [H]: 5 to 30 V DC, [L]: 0 to 2 V DC No-voltage input (NPN) - short-circuit impedance: ≤1 kΩ, short-circuit residual voltage: ≤2 V DC |
One-Shot Output Time | 0.01 to 99.99 seconds |
Contact Control Output | Relay Type (1-stage) SPDT (1c) x 1 Type (2-stage) Standard: SPST (1a) x 1, SPDT (1c) x 1, communication: SPST (1a) x 2 Capacity: 250 V AC 3 A, 30 V DC 3 A resistive load |
Solid-State Control Output | NPN open collector Type (1-stage): Standard: x 1, communication: x 1 Type (2-stage): Standard: x 1 Capacity: ≤30 V DC, 100 mA |
Terminal | Terminal block |
Output Operation | Signal on delay, power on delay, flicker, interval, signal off delay, on-off delay, integration time |
Time Operation | Power on start, signal on start |
Maximum Counting Speed | 1, 30, 1 k, 5 k, 10 k [cps] |
Minimum Signal Width | 1 ms/20 ms |
Memory Protection | Approximately 10 years (non-volatile semiconductor memory type) |
Setting Range | 0.001 to 9.999 seconds, 0.01 to 99.99 seconds, 0.1 to 999.9 seconds, 1 to 9999 seconds, 1 second to 99 minutes and 59 seconds, 0.1 to 999.9 minutes, 1 to 9999 minutes, 1 minute to 99 hour and 59 minutes, 1 to 9999 hours |
Insulation Resistance | ≥100 MΩ (500 V DC megger) |
Dielectric Strength | 2000 V AC 50/60 Hz for 1 minute |
Noise Immunity | ±2 kV square wave noise (pulse width: 1 μs) by the noise simulator |
Vibration | 0.029" (0.75 mm) double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 1 hour Malfunction: 0.019" (0.5 mm) double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 10 minute |
Shock | 300 m/s² (≈ 30 G) in each X, Y, Z direction for 3 times Malfunction: 100 m/s² (≈ 10 G) in each X, Y, Z direction for 3 times |
Relay Life Cycle | Mechanical: ≥1,000,000 operations Electrical: ≥100,000 operations |
RS485 | Communication protocol: Modbus RTU (16-bit CRC) Application standard: Compliance with EIA RS485 Maximum connection: 31-unit (address: 1 to 127) Communication synchronous method: Asynchronous Communication method: 2-wire half duplex Communication distance: ≤2624.67' (800 m) Communication speed: 2400/4800/9600 (default)/19,200/38,400 bps Communication response time: 5 to 99 ms (default: 20 ms) Start bit: 1-bit (fixed) Data bit: 8-bit (fixed) Parity bit: None (default), even, odd Stop bit: 1-bit, 2-bit (default) EEPROM life cycle: ≈ 1,000,000 operations (erase/write) |
Protection Structure | IP65 (front panel) |
Environment | Ambient temperature: 14 to 131°F (-10 to 55°C), storage: -13 to 149°F (-25 to 65°C), no freezing or condensation Ambient humidity: 35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
Power | Supply: 100 to 240 V AC, ±10% 50/60 Hz Consumption: ≤12 V A External supply: ≤12 V DC, ±10%, 100 mA |
Dimensions | 2.83 x 1.41" (72 x 36 mm) Character size: Counting value: 0.16 x 0.37" (4.2 x 9.5 mm) Setting value: 0.13 x 0.27" (3.5 x 7 mm) |
Weight | 0.3 lbs (140 g) |
Display | Digits: 6-digit 7-segment (counting value: red, setting value: green) LED |
Counter | Count up, count down, count up/down Counting range: -99999 to 999999 |
Timer | Count up, count down Error: Repeat/SET/voltage/temperature - Power ON start: ≤±0.01% ±0.05 second, Signal ON start: ≤±0.01% ±0.03 second |
Input Logic | Voltage input (PNP) - input impedance: 5.4 kΩ, [H]: 5 to 30 V DC, [L]: 0 to 2 V DC No-voltage input (NPN) - short-circuit impedance: ≤1 kΩ, short-circuit residual voltage: ≤2 V DC |
One-Shot Output Time | 0.01 to 99.99 seconds |
Contact Control Output | Relay Type (1-stage) SPDT (1c) x 1 Type (2-stage) Standard: SPST (1a) x 1, SPDT (1c) x 1, communication: SPST (1a) x 2 Capacity: 250 V AC 3 A, 30 V DC 3 A resistive load |
Solid-State Control Output | NPN open collector Type (1-stage): Standard: x 1, communication: x 1 Type (2-stage): Standard: x 1 Capacity: ≤30 V DC, 100 mA |
Terminal | Terminal block |
Output Operation | Signal on delay, power on delay, flicker, interval, signal off delay, on-off delay, integration time |
Time Operation | Power on start, signal on start |
Maximum Counting Speed | 1, 30, 1 k, 5 k, 10 k [cps] |
Minimum Signal Width | 1 ms/20 ms |
Memory Protection | Approximately 10 years (non-volatile semiconductor memory type) |
Setting Range | 0.001 to 9.999 seconds, 0.01 to 99.99 seconds, 0.1 to 999.9 seconds, 1 to 9999 seconds, 1 second to 99 minutes and 59 seconds, 0.1 to 999.9 minutes, 1 to 9999 minutes, 1 minute to 99 hour and 59 minutes, 1 to 9999 hours |
Insulation Resistance | ≥100 MΩ (500 V DC megger) |
Dielectric Strength | 2000 V AC 50/60 Hz for 1 minute |
Noise Immunity | ±2 kV square wave noise (pulse width: 1 μs) by the noise simulator |
Vibration | 0.029" (0.75 mm) double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 1 hour Malfunction: 0.019" (0.5 mm) double amplitude at frequency of 10 to 55 Hz (for 1 minute) in each X, Y, Z direction for 10 minute |
Shock | 300 m/s² (≈ 30 G) in each X, Y, Z direction for 3 times Malfunction: 100 m/s² (≈ 10 G) in each X, Y, Z direction for 3 times |
Relay Life Cycle | Mechanical: ≥1,000,000 operations Electrical: ≥100,000 operations |
RS485 | Communication protocol: Modbus RTU (16-bit CRC) Application standard: Compliance with EIA RS485 Maximum connection: 31-unit (address: 1 to 127) Communication synchronous method: Asynchronous Communication method: 2-wire half duplex Communication distance: ≤2624.67' (800 m) Communication speed: 2400/4800/9600 (default)/19,200/38,400 bps Communication response time: 5 to 99 ms (default: 20 ms) Start bit: 1-bit (fixed) Data bit: 8-bit (fixed) Parity bit: None (default), even, odd Stop bit: 1-bit, 2-bit (default) EEPROM life cycle: ≈ 1,000,000 operations (erase/write) |
Protection Structure | IP65 (front panel) |
Environment | Ambient temperature: 14 to 131°F (-10 to 55°C), storage: -13 to 149°F (-25 to 65°C), no freezing or condensation Ambient humidity: 35 to 85% RH, storage: 35 to 85% RH (no freezing or condensation) |
Power | Supply: 100 to 240 V AC, ±10% 50/60 Hz Consumption: ≤12 V A External supply: ≤12 V DC, ±10%, 100 mA |
Dimensions | 2.83 x 1.41" (72 x 36 mm) Character size: Counting value: 0.16 x 0.37" (4.2 x 9.5 mm) Setting value: 0.13 x 0.27" (3.5 x 7 mm) |
Weight | 0.3 lbs (140 g) |