- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Ultra rugged and easy to use, this differential pressure gauge is capable of continuous vacuum measurements with 0.1% of reading accuracy. In addition, this gauge features a 0 to 100 kPa range and determines accurate differential pressure measurements across many applications or installations.
Ultra rugged and easy to use, this differential pressure gauge is capable of continuous vacuum measurements with 0.1% of reading accuracy. In addition, this gauge features a 0 to 100 kPa range and determines accurate differential pressure measurements across many applications or installations.
Operate this accurate differential pressure gauge for up to 1500 hours of continuous use with its 3 x batteries that come included. In addition, this pressure gauge's marine-grade enclosure resists corrosion.
Features
Applications
| Range | 100 kPa |
| Over-Pressure (+/- Ports) | 6.5 x/3.0 x |
| Display | Screen: 5.5 digits, 0.67" (16.9 mm) high Rate: 4 readings/second (standard) and 8 readings/second (PSV mode) LCD readable in sunlight with bright backlight. PSV mode is intended for pressure safety valve testing, and requires software to enable. (ConfigXP is a free download) Resolution: kPa: 0.01 MPa: 0.00001 bar: 0.0001 mbar: 0.1 |
| Diffirential Pressure Accuracy | 0 to 20% of range: ± (0.02% of full scale + static line effect)* 20% to 110% of range: ± (0.1% of reading + static line effect)* For continuous vacuum use, connect to the right (-) port marked "Vacuum this side." *Static line effect: 0.0003 psi/psi lowest static pressure |
| Temperature | Operating: 14 to 122°F (-10 to 50°C) non-condensing. No change in accuracy over operating temperature range. Gauge must be zeroed to achieve rated specification Storage: -40 to 167°F (-40 to 75°C) battery should be removed if stored for more than one month |
| Sensor | Wetted materials: 300 series stainless steel and buna-n (internal o-ring) Diaphragm seal fluid: Dow corning® 200 Connection: ⅛" female NPT Maximum static line pressure: 100 psi All welded, with a permanently filled diaphragm seal |
| Datalogging | Capacity: 32,000 data points Storage type: Non-volatile flash memory Minimum interval: 1 second Maximum interval: 18 hours Minimum event duration: 250 mS*** ***Logging type- average with peaks These specifications are only applicable with the purchase of the DataLoggerXP which is sold separately |
| Power | Batteries: Three size AA (LR6) batteries Battery life: 1500 hours typical (alkaline battery) Ultra low power: 1 year, typical with 20 minute recording interval in LT5 mode Battery indicator: 3-segment Battery Icon: Full battery; used battery; low battery Dead battery indication: batt |
| Housing | Diecast aluminum |
| Keypad and Labels | UV resistant polyester |
| Data/Communication | Digital interface: RS232, DB-9F (for hazardous location product warnings, refer to the operation manual) |
| Media Compatibility | Liquids and gases compatible with 300 series stainless steel and buna-n (o-ring) |
| LCD Protection | From impact damage by 0.06" (1.5 mm) thick polycarbonate lens under polyester window. |
| Submersible | To 3.3' (1 m) for 30 minutes [IEC 60529] |
| Plating | Nickel plating over low copper, marine grade aluminum |
| Rating | IP67 |
| Certifications | This digital pressure gauge complies with the Australian Radiocommunications (Electromagnetic Compatibility) Standard 2008 Crystal Engineering declares that this digital pressure gauge is in accordance with the ATEX Directive, the Electromagnetic Compatibility Directive, and the Pressure Equipment Directive per our declaration(s) This digital pressure gauge is approved for use as a portable test instrument for marine use and complies with Det Norsjke Veritas' rules for classification of ships, high speed and light craft, and offshore standards |
| Dimensions | 6.5 x 4.4 x 1.3" (165.1 x 112 x 33 mm) |
| Weight | 2 lbs (915 g) |
| Range | 100 kPa |
| Over-Pressure (+/- Ports) | 6.5 x/3.0 x |
| Display | Screen: 5.5 digits, 0.67" (16.9 mm) high Rate: 4 readings/second (standard) and 8 readings/second (PSV mode) LCD readable in sunlight with bright backlight. PSV mode is intended for pressure safety valve testing, and requires software to enable. (ConfigXP is a free download) Resolution: kPa: 0.01 MPa: 0.00001 bar: 0.0001 mbar: 0.1 |
| Diffirential Pressure Accuracy | 0 to 20% of range: ± (0.02% of full scale + static line effect)* 20% to 110% of range: ± (0.1% of reading + static line effect)* For continuous vacuum use, connect to the right (-) port marked "Vacuum this side." *Static line effect: 0.0003 psi/psi lowest static pressure |
| Temperature | Operating: 14 to 122°F (-10 to 50°C) non-condensing. No change in accuracy over operating temperature range. Gauge must be zeroed to achieve rated specification Storage: -40 to 167°F (-40 to 75°C) battery should be removed if stored for more than one month |
| Sensor | Wetted materials: 300 series stainless steel and buna-n (internal o-ring) Diaphragm seal fluid: Dow corning® 200 Connection: ⅛" female NPT Maximum static line pressure: 100 psi All welded, with a permanently filled diaphragm seal |
| Datalogging | Capacity: 32,000 data points Storage type: Non-volatile flash memory Minimum interval: 1 second Maximum interval: 18 hours Minimum event duration: 250 mS*** ***Logging type- average with peaks These specifications are only applicable with the purchase of the DataLoggerXP which is sold separately |
| Power | Batteries: Three size AA (LR6) batteries Battery life: 1500 hours typical (alkaline battery) Ultra low power: 1 year, typical with 20 minute recording interval in LT5 mode Battery indicator: 3-segment Battery Icon: Full battery; used battery; low battery Dead battery indication: batt |
| Housing | Diecast aluminum |
| Keypad and Labels | UV resistant polyester |
| Data/Communication | Digital interface: RS232, DB-9F (for hazardous location product warnings, refer to the operation manual) |
| Media Compatibility | Liquids and gases compatible with 300 series stainless steel and buna-n (o-ring) |
| LCD Protection | From impact damage by 0.06" (1.5 mm) thick polycarbonate lens under polyester window. |
| Submersible | To 3.3' (1 m) for 30 minutes [IEC 60529] |
| Plating | Nickel plating over low copper, marine grade aluminum |
| Rating | IP67 |
| Certifications | This digital pressure gauge complies with the Australian Radiocommunications (Electromagnetic Compatibility) Standard 2008 Crystal Engineering declares that this digital pressure gauge is in accordance with the ATEX Directive, the Electromagnetic Compatibility Directive, and the Pressure Equipment Directive per our declaration(s) This digital pressure gauge is approved for use as a portable test instrument for marine use and complies with Det Norsjke Veritas' rules for classification of ships, high speed and light craft, and offshore standards |
| Dimensions | 6.5 x 4.4 x 1.3" (165.1 x 112 x 33 mm) |
| Weight | 2 lbs (915 g) |
