Level Switches

Combine low cost and reliability with fast, simple installation. Hermetically sealed reed switches are actuated by magnets permanently bonded inside the float and can be easily adapted to open or close a circuit on rising or falling levels.

Mechanically actuated floating switch intended to activate electrical components, usually pumps, to start and stop automatically. The CFS2 is perfect for simple level control of liquids for filling or draining reservoirs and tanks. Counterweights and cable hangers are available to suit a variety of mounting applications.

These float switches work like a standard light switch, they open and close contacts to control whether or not signal current can pass through. When they are closed, the current is flowing and when they are open, the current is not flowing. The "normal" state is when the float switch is down, resting on it's cable or float stop. Some float switches have hysteresis built-in which tells the pump not to chatter, but to turn off at one level, and turn on only at another level. The floats have multiple up to four switch points in a single float. Many float switches are simply used for level indication.

Designed and built for years of trouble-free service in a wide variety of process liquid level applications. Operation is simple and dependable with no mechanical linkage as the level switch is magnetically actuated. The float lever pivoted within the body moves when the process liquid displaces the float.

The Mini-Bin provides reliable level sensing for dry bulk solids where mounting space is limited. This compact, side mount control reports high, intermediate, and low level conditions, eliminating overflows, choking, clogs or empty vessels. Model DBLM Mini-Bin operates by using a 1 rpm synchronous motor to rotate a four vane, plastic paddle.

Series F6 & F7 Horizontal Mount Level Switches are designed to mount through the walls of tanks and other vessels. Series F6 & F7 Specialty Level Switches are designed for unique applications.