Megger DCM330 Offers

With AC and DC voltage measurements up to 1000 V and resistance measurements up to 20 milliohm, a non-contact voltage detection facility and a continuity buzzer with diode check, the Megger DCM330 is a truly versatile instrument. All of these features combined into a single compact instrument eliminate the need for separate multimeter and clampmeter.

The large central range knob enables ambidextrous singlehanded use, and the separate voltage/resistance test leads can be disconnected when not in use.

The open-jaw design of the clampmeter enables simple and fast measurements to be made on single conductors up to 0.63 in. (16mm) diameter. With no moving clamp parts, the Megger DCM330 is not susceptible to dirt, grit or moisture around the cable, so is equally ideal for use in dirty trenches or trunking; or clean laboratory conditions. It provides average responding RMS values, and with the conductor(s) positioned centrally and squarely within the jaws, achieves readings of better than 3% accuracy.

The Megger DCM330 is auto-ranging on all ranges. Current measurement and the non-contact voltage sensor do not need the test leads; all other functions will require their use.

The voltage detection function can identify the presence of live AC voltages from 50 V to 1000 V at 50 to 500 Hz. It is operational on any range including OFF. Voltage is capacitively detected, signaled by a tone sounding and the illumination of a red LED situated below the clamp head.

Features

• Measures AC current up to 200 A
• Auto-ranging AC and DC voltage measurement from 0.1 V to 1000 V
• Resistance range of 0.1 ohms to 20 milliohm
• Open-jaw design enables fast measurements on single conductors up to 0.63 in. (16 mm) diameter
• Continuity buzzer and diode check
• Non-contact detection of AC voltage
• Safety rated to CAT III 1000V and CAT IV 600 V
• Compact pocket-sized design: 2.12 x 7.6 x 1.22 in. (W x H x D)
• Auto power-off after 10 minutes for battery savings

Applications

• Domestic and industrial wiring installation fault-finding
• Basic load analysis
• Equipment commissioning and maintenance
• Machinery installations