Measure voltage up to 1000 V AC through its open fork with this electrical tester. On the other hand, the magnetic meter hanger allows you to hang your meter in a variety of ways and the voltage tester tests for energized circuits. Additionally, this kit is ideal for commercial and light industrial electricians.
Measure voltage up to 1000 V AC through its open fork with this electrical tester. On the other hand, the magnetic meter hanger allows you to hang your meter in a variety of ways and the voltage tester tests for energized circuits. Additionally, this kit is ideal for commercial and light industrial electricians.
Measure voltage … without test leads
Measure voltage up to 1000 V ac due to FieldSense technology, which easily and quickly takes measurements by sliding a conductor through the open fork. Additionally, without opening covers or removing wire nuts, on wires up to AWG 4/0 (120 mm2), carrying as much as 200 A which makes the jobs safer, faster and easier.
Features
Why use this electrical tester?
Electricians often work in boxes jammed with wires, where finding a safe metallic contact point can be a challenge. With this tester they can take measurements by sliding a single wire into the open fork.
How FieldSense works
FieldSense technology is truly a breakthrough in how voltage is measured. While other open fork testers detect a magnetic field to show ac current, FieldSense technology detects an electrical field. This field interacts with a reference signal created by the tester, creating a voltage value on the tester's display.
Tips: FieldSense technology
Do not hold or touch wire you are testing during a measurement. Use the black probe to make the ground connection if:
FieldSense measurement looks like this when probably grounded:
Applications
Fluke TPAK ToolPak Magnetic Meter Hanger
Take hands-free measurements with this meter hanger. The kit allows you to hang your meter in a variety of ways-including on nails, hooks and many other objects—solving any hanging and positioning problem you may face.
Please note that the TPAK doesn't clip into the Fluke T6 Series like it does for other Fluke meters. Instead, you must simply feed the Velcro loop through the slot on the back of the T6 and Velcro it together.
Features
Facilities maintenance professionals face a wide range of challenges, from electrical and mechanical equipment uptime to overall safety concerns. It’s critical to maintain facilities and the associated assets at peak performance. Let's review the issues faced by maintenance managers, IT support, and electrical/mechanical technicians. Along with the Fluke solutions that offer to save you time and money while increasing efficiency and safety. Fluke makes reliable, rugged and accurate tools to maintain electromechanical systems, motors, pumps, electrical distribution systems and more to keep your world up and running.
Learn MoreFieldSense AC Voltage True RMS | |
Requires Test Leads | No |
Range | 1000 V |
Resolution | 1 V |
Accuracy | ±(3% + 3 counts) 45 to 66 Hz |
FieldSense AC Current True RMS | |
Requires Test Leads | No |
Range | 200.0 A |
Resolution | 0.1 A |
Accuracy | ±(3% + 3 counts) 45 to 66 Hz |
FieldSense Frequency (Hz) | |
Requires Test Leads | No |
Range | 45 to 66 Hz |
Resolution | 1 Hz |
Accuracy | ±(1% + 2 counts) |
Volts AC True RMS | |
Requires Test Leads | Yes |
Range | 1000 V |
Resolution | 1 V |
Accuracy | ±(1.5% + 2 counts) 45 to 66 Hz |
Volts DC | |
Requires Test Leads | Yes |
Range | 1000 V |
Resolution | 1 V |
Accuracy | ±(1% + 2 counts) |
Resistance | |
Requires Test Leads | Yes |
Range | 1000 V 2000 Ω 20 kΩ 100 kΩ |
Resolution | 1 V 1 Ω 0.01 kΩ 0.1 kΩ |
Accuracy | ±(1% + 2 counts) |
Safety | |
Range | 1000 V CAT III 600 V CAT IV |
General Specifications | |
Calibration | One year calibration cycle |
Jaw Opening | 0.7" (17.8 mm) |
Operating Temperature | 14 to 122°F (-10 to 50°C) |
Storage Temperature | -22 to 140°F (-30 to 60°C) |
Operating Altitude | 6562' (2000 m) |
Storage Altitude | 32,808' (10,000 m) |
Relative Humidity | 0 to 90%, 41 to 86°F (5 to 30°C) 0 to 75%, 86 to 104°F (30 to 40°C) 0 to 45%, 104 to 122°F (40 to 50°C) |
Battery Type and Life | 2 x AA (IEC LR6) 360 hours continuous Typical; 200 hours using FieldSense |
Temperature Coefficient | 0.1 x (specified accuracy) /°C for <18 or >28°C |
Safety | IEC/EN 61010-1: Pollution degree 2 |
Electromagnetic Environment | IEC/EN 61326-1: Portable |
Dimensions | 2.4 x 10.2 x 1.7" (61.1 x 259.3 x 43.8 mm) |
Weight | 0.78 lb (350 g) |
So much more than just a voltage detector, these testers give you a reliable voltage and current measurement, without test leads, and without contacting a bare, metal conductor.
Hang your meter in a variety of ways for convenient hands-free operation. Attaches to most Fluke meters.
Click on a category to view a selection of compatible accessories with the Fluke T6-1000 Electrical Tester with TPAK Magnetic Meter Hanger Kit.
FieldSense AC Voltage True RMS | |
Requires Test Leads | No |
Range | 1000 V |
Resolution | 1 V |
Accuracy | ±(3% + 3 counts) 45 to 66 Hz |
FieldSense AC Current True RMS | |
Requires Test Leads | No |
Range | 200.0 A |
Resolution | 0.1 A |
Accuracy | ±(3% + 3 counts) 45 to 66 Hz |
FieldSense Frequency (Hz) | |
Requires Test Leads | No |
Range | 45 to 66 Hz |
Resolution | 1 Hz |
Accuracy | ±(1% + 2 counts) |
Volts AC True RMS | |
Requires Test Leads | Yes |
Range | 1000 V |
Resolution | 1 V |
Accuracy | ±(1.5% + 2 counts) 45 to 66 Hz |
Volts DC | |
Requires Test Leads | Yes |
Range | 1000 V |
Resolution | 1 V |
Accuracy | ±(1% + 2 counts) |
Resistance | |
Requires Test Leads | Yes |
Range | 1000 V 2000 Ω 20 kΩ 100 kΩ |
Resolution | 1 V 1 Ω 0.01 kΩ 0.1 kΩ |
Accuracy | ±(1% + 2 counts) |
Safety | |
Range | 1000 V CAT III 600 V CAT IV |
General Specifications | |
Calibration | One year calibration cycle |
Jaw Opening | 0.7" (17.8 mm) |
Operating Temperature | 14 to 122°F (-10 to 50°C) |
Storage Temperature | -22 to 140°F (-30 to 60°C) |
Operating Altitude | 6562' (2000 m) |
Storage Altitude | 32,808' (10,000 m) |
Relative Humidity | 0 to 90%, 41 to 86°F (5 to 30°C) 0 to 75%, 86 to 104°F (30 to 40°C) 0 to 45%, 104 to 122°F (40 to 50°C) |
Battery Type and Life | 2 x AA (IEC LR6) 360 hours continuous Typical; 200 hours using FieldSense |
Temperature Coefficient | 0.1 x (specified accuracy) /°C for <18 or >28°C |
Safety | IEC/EN 61010-1: Pollution degree 2 |
Electromagnetic Environment | IEC/EN 61326-1: Portable |
Dimensions | 2.4 x 10.2 x 1.7" (61.1 x 259.3 x 43.8 mm) |
Weight | 0.78 lb (350 g) |
So much more than just a voltage detector, these testers give you a reliable voltage and current measurement, without test leads, and without contacting a bare, metal conductor.
Hang your meter in a variety of ways for convenient hands-free operation. Attaches to most Fluke meters.
Click on a category to view a selection of compatible accessories with the Fluke T6-1000 Electrical Tester with TPAK Magnetic Meter Hanger Kit.